Modular Raspberry Pi5 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular Raspberry Pi5 case that allows to stack Waveshare USB hat and PiMoroni NVMe base
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 510
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Instructions
What you need is to choose a top and a base build the enclosure for your Raspberry Pi5.
If you need an enclosure for PiMoroni NVMe base and/or Waveshare USB hat, this configurator can help you to choose the correct files to print.
There are some holes closed but only by one or two layer of material, so you can easily open them with a screwdriver if you need them.
Notes
The Waveshare module is better to print upside-down so you don’t need supports.
If you need it, there is a button (Accessory-Button file). You can insert in Module-RPi5 then fix it with a bit of tape to avoid losing it if you have to disassemble the case.
2026-09-15 upgrades
Improved Pi stability
Files changed:
Module-RPi5_Base-Flat-merged
Module-RPi5
Added telescope finderscope accessories
Files added:
Cover-Finderscope
Telescope-accessory-dovetail
Finderscope-support