Multiboard Holder for Ozito 18V Reciprocating Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard press-fit holder for Ozito 18V reciprocating saw - vertical storage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This holder was designed to securely store an Ozito 18V reciprocating saw on a Multiboard system. It holds the tool vertically.
The mount is a press-fit design that attaches directly to Multiboard snaps. I used the Raised Moderate Weight-Bearing Snap, but the holder can also be inserted into other snaps if you already have them installed on your board.
Print Details
Material: PLA
Supports: Required as the angle is too shallow. I recommend printing it in the same orientation as it will be installed.
Infill/Walls: I used 50% infill with 3 walls
Assembly: None - just print and press-fit into the chosen snap
A sturdy and compact way to keep your reciprocating saw organised on the Multiboard system.