1 / 6
Battery Sled for Otamatone Deluxe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your own Otamatone Deluxe AA battery holder! Enjoy a modified designed with FDM printability in mind.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Print your own Otamatone Deluxe Battery sled! Ideal for replacing a broken or lost part, or for having an extra pack on hand for a quick reload during a live performance.
This design has identical outer dimensions to the original part, but has a few thoughtful modifications:
- Chamfers and Staggered Overhangs for clean printing with no supports.
- Added depth to wire cavity to fit thicker wires.
- Adjusted wall thickness to accommodate nozzle width
PRINTING TIPS
- Print Battery Sled with the open side facing the build plate. No supports needed.
- Ensure good bed adhesion to avoid warping on Battery Sled.
- Allow Wire Cover to cool on build plate to avoid deformation during removal.
Note: Some additional parts and beginner level soldering is required for assembly.
PARTS NEEDED
You can reuse the parts from an original battery holder, otherwise you will need:
- Battery Contacts https://amzn.to/4p9fdyD
- Some of them will require their tabs to be cut/removed.
- Wire
- At least 75mm/3" long
- Less than 1.8mm Diameter (including insulation)