1 / 6
Battery Sled for Otamatone Deluxe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print your own Otamatone Deluxe AA battery holder! Enjoy a modified designed with FDM printability in mind.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
Print your own Otamatone Deluxe Battery sled! Ideal for replacing a broken or lost part, or for having an extra pack on hand for a quick reload during a live performance.
This design has identical outer dimensions to the original part, but has a few thoughtful modifications:
- Chamfers and Staggered Overhangs for clean printing with no supports.
- Added depth to wire cavity to fit thicker wires.
- Adjusted wall thickness to accommodate nozzle width
PRINTING TIPS
- Print Battery Sled with the open side facing the build plate. No supports needed.
- Ensure good bed adhesion to avoid warping on Battery Sled.
- Allow Wire Cover to cool on build plate to avoid deformation during removal.
Note: Some additional parts and beginner level soldering is required for assembly.
PARTS NEEDED
You can reuse the parts from an original battery holder, otherwise you will need:
- Battery Contacts https://amzn.to/4p9fdyD
- Some of them will require their tabs to be cut/removed.
- Wire
- At least 75mm/3" long
- Less than 1.8mm Diameter (including insulation)