Filament Dryer Shroud for OSTBA Digital Food Dehydrator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap-together shroud/spacer to allow for filament drying in the OSTBA 240W Digital Food Dehydrator:…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a snap-together shroud/spacer to allow for filament drying in the OSTBA 240W Digital Food Dehydrator: https://www.amazon.com/gp/product/B085QKT3V4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
There are several other good designs out there for round dehydrators like the Westinghouse models, but I wanted to be able to use a digital model with a timer. I settled on the OSTBA model due to features and reasonable price.
There are two versions; a continuous single shroud for larger printers and a 4-piece snap-together version for small print beds. For the snap together version, print two of each plate (A and B). Both fit 100mm spools. I may develop versions with filament outlets and bearings to allow printing directly from the dryer.
I printed in PETG for the additional flexibility and strength over PLA.
Enjoy!
Category: 3D Printer Accessories