Samsung Remote AirTag Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
1,09 € – 1,33 € netto (bez VAT)
Dla pliku: Remote AirTag_0.4n_0.15mm_PLA_MK3.5_1h21m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,21 € netto (środek widełek).
- Masa podana przez autora
- 12 g
- Czas druku podany przez autora
- 1,36 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Sleeve to attach an Apple AirTag to the remote for the 2022 Samsung The Frame TV (LS03B)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What
This sleeve allows you to attach an Apple AirTag to the remote of the 2022 version of Samsung's The Frame TV, model LS03B. I use the term "attach" loosely. It just slides on, so it's a temporary attachment. The fit is comfortable. It slides on and off with a little friction, but by no means is it difficult to get on or off. Still, it isn't likely to fall off.
As an added bonus, the remote stands on end much better now. I never knew I preferred my remotes to be vertical when setting them down.
Who
It is highly possible that this will fit other Samsung remotes. I made it specifically for the previously mentioned model because that's the one I have and the one shown in the pictures. I'm not going to do the research to find out all the TV models Samsung made with similar remotes. I've already spent too much time on this design as it is. (Thank you, Samsung, for making this remote a difficult, rounded trapezoidal shape!)
That's part of the reason I'm posting this. My hope is that at least one other person in this world/community will find this useful. So, if you do use it, please give it a like and maybe even leave a comment so I sleep better at night, even if it's a negative comment. I'm always open to constructive criticism.
Why
Why might one need to attach an AirTag to a remote? Well, I, for one, have a toddler who likes to hide things that are extremely useful and don't belong to her. And I'm already down two remotes.
How
The one in the picture was made using Hatchbox PLA with a layer height of 0.15 mm for increased dimensional accuracy. I printed it as oriented in the files, standing up. I used organic supports for the top of the circular portion of the AirTag enclosure to ensure it didn't sag and the AirTag would fit. I suspect it would print fine without supports, but I haven't tested it. The time difference between the speed and structural profiles was minimal, so I opted for the structural option, but that's just a personal preference.