Samsung Remote AirTag Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.09 – €1.33 net (excluding VAT)
For file: Remote AirTag_0.4n_0.15mm_PLA_MK3.5_1h21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.21 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sleeve to attach an Apple AirTag to the remote for the 2022 Samsung The Frame TV (LS03B)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 41
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What
This sleeve allows you to attach an Apple AirTag to the remote of the 2022 version of Samsung's The Frame TV, model LS03B. I use the term "attach" loosely. It just slides on, so it's a temporary attachment. The fit is comfortable. It slides on and off with a little friction, but by no means is it difficult to get on or off. Still, it isn't likely to fall off.
As an added bonus, the remote stands on end much better now. I never knew I preferred my remotes to be vertical when setting them down.
Who
It is highly possible that this will fit other Samsung remotes. I made it specifically for the previously mentioned model because that's the one I have and the one shown in the pictures. I'm not going to do the research to find out all the TV models Samsung made with similar remotes. I've already spent too much time on this design as it is. (Thank you, Samsung, for making this remote a difficult, rounded trapezoidal shape!)
That's part of the reason I'm posting this. My hope is that at least one other person in this world/community will find this useful. So, if you do use it, please give it a like and maybe even leave a comment so I sleep better at night, even if it's a negative comment. I'm always open to constructive criticism.
Why
Why might one need to attach an AirTag to a remote? Well, I, for one, have a toddler who likes to hide things that are extremely useful and don't belong to her. And I'm already down two remotes.
How
The one in the picture was made using Hatchbox PLA with a layer height of 0.15 mm for increased dimensional accuracy. I printed it as oriented in the files, standing up. I used organic supports for the top of the circular portion of the AirTag enclosure to ensure it didn't sag and the AirTag would fit. I suspect it would print fine without supports, but I haven't tested it. The time difference between the speed and structural profiles was minimal, so I opted for the structural option, but that's just a personal preference.