Counting matching models…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
Storage sleeve designed for FJ Cruiser center console. Main section to fit mobile phone (etc.) and two attachments, one sized for a gum container and the other for a small bottle and lipsalve. Extra road trip storage :) Print Settings…
This is an insert for Kreel Manor , the boardgame. It keeps all the components from the base game and two expansions organised. I am using Sleeve Kings (60micron) sleeves to sleeve my cards, if your sleeves are thicker, the cards may not…
I have been using these handles on my CI and MP picks and love them. Got the Reaper set and decided to modify them to fit it. They should be a snug fit and go on about 50% freely. Once u hit that spot use a lighter or hair dyer to warm…
Fits sleeves and both the All Your Base and Break for Launch expansions. Setting up Impulse has always been a big annoyance. It was a longtime goal of mine to create an organizer for this game that included separate player boxes and…
Funnel with threaded sleeve for jug Made to fit jugs with 40mm (inner) to 44mm (outer) threads 4mm thread pitch Printing Print top down with brim some brim as the cantact area is low. No supports should be necessary. Example funnel…
To keep my keys and padlocks apart, I created these sleeves for the key and corresponding padlock. This one fits the Three Circles 264 padlock. Best results are obtained when printing the key sleeve upright and using supports for the…
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
Have a favorite band or artist that you just can't shut up about? Want to show your appreciation for them literally everywhere you go? Well, look no further. Print this out, print out a 2x2 inch image of two sides of one of their vinyl…
A simple cable comb for sleeved PCIE 6 pin cables, tested on sleeved wires with a total diameter of 3.1mm.
This model is a bit niche but maybe it will be useful to someone. It is a bottle sleeve for a glass bottle of the spirit Guillon 46° 20cl I plan to reuse this bottle and make it my whisky flask The sleeve will protect the glass and the…
Remixed to support sleeved cards. I also added the value of the tokens for their storage.
Quick-to-print sleeves to help organize gift wrapping paper. You can write on them if desired to indicate their purpose or any other message. Included both a 40mm and 50mm size that can expand to accommodate slightly larger sizes Gcode…
In my WC there is a 110mm water pipe running through the room (top-down). As a simple optical upgrade, I want to decorate the ends of the water pipe with a deco-pipe-sleeve that can be assembled without changing the water pipe. This is my…
Want to take another step toward zero-waste but always forget your reusable mug at home? This sleeve fits in your bag and is always ready without needing to be washed after each use. It's perfect for coffee and tea lovers both, and…
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
These are sleeves that will fit over a Remarkable pen / marker (fit to the Marker Plus), which supports the replaceable stylus tip. The plastic structure on these markers that normally supports the tip is very thin and brittle. Dropping…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
This is a protective sleeve for a pressure gauge of a pressure washer. P/N of the gauge is NILFISK 301000246 - 300bar, 1/8" BSP (28 tpi) thread, OD roughly 41mm, length 26,5mm. Printed out of TPU, 3 outside layers, 25% infill.
We have seen lots of printed box openers that you can attach to a key ring. How about using the actual key ring as the cutter because it will never break or wear out? Depending on your ring you can cut pretty thick cardboard with it. This…
##### Highly Experimental ##### This model is highly inspired by the sotar shock damping system . It works on the same principles. It allows the variant flow rates based on piston position. The model has parameters defined so you can…
A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!
I used https://makerworld.com/en/makerlab/parametricModelMaker to make a simple deckbox for sleeved Daggerheart cards
Cup holder sleeve to slip into a tapered cup holder to hold a 500ml can. Measurements to fit a Ford Transit Connect MkII but will fit many other cars/vans with a tapered cupholder. Drawing with measurements included.
🔥 BIC Secure‑Grip Lighter Sleeve 🔥 A print‑ready sleeve optimized for any 3D printer—no supports, minimal filament use, and gentle overhangs. Its compliant walls adapt to slight size variances across Bic Classic, Bic Classic Push, Bic EZ…
Motorcycle jacket sleeve air vent. Credit Remix of Motorcycle Jacket Sleeve Vent / Airflow by @How._. : Added a grate to prevent the nasties from getting in
This is an insert for The Lord of the Rings: Fate of the Fellowship board game. It keeps the original cardboard insert but adds boxes to organize the components that otherwise would be stored in baggies loose in the box. This insert IS…
This model was made for a local coffee shop that had a really bad storage for coffee sleeves. I had the barring for years and decided to put it to good use. The model prints in two haves so that the steps from the angled section can be…
The strength of PLA is not enough (tested), so I used a PETG I recommend printing horizontally. Otherwise, the main load will be on the layers breaking, and the part will be fragile. It may be difficult to fit into the target hole…
I wanted something to cover this lock so I wouldn't accidentally scratch my tailgate with one of the sharp corners. This is a very simple sleeve design but it gets the job done and I put some little ridges on the edge to grip the beveled…
fits ONLY the g3 Lite KOKO (not PRO models) print in tpu, 3 walls, supports on. auxiliary lanyard loop built right in, for when your dog chews off the original.
An insert I created for Tenpenny Parks by ThunderWorks games.
EN: Insert for Wyrmspan + Dragon Academy with sleeved cards (sleeves for cave cards were cut - 58 mm in hieght). I added some filling parts to set perfectly in the box (simple boxes, placed mostly upside down). You will need some parts in…
Simple insert for game Trails with sleeved cards. Jednoduchý insert pro hru Parky: Na cestách s obalenými kartami.
35.5mm outer and 32.5mm inner diameter for perfect alignment of Brompton seatpost sleeve reamer. No need for additional sleeve or fancy reamer, just get a cheap 32mm reamer and be back riding for a quarter of the cost of one from…
This is for cards without any protective sleeves. Made to show off raw cards. NEVER put a good card in without testing the fit of it. This could result in scratched edges. There is another model on my profile for cards with sleeves.
This design might be a little big, but it is that way on purpose, so you don't end up damaging your better cards trying to squeeze them in. You can scale down the design in your slicer if you would like.
Made a key fob sleeve for 2025 Taycan so I don't trigger trunk pops. Probably fits other Porsche sports car fobs but not Macan EV 2025 (see my other models for that). Recommend printing it with softer material like PLA standing vertical…
This is an insert for the card game The Crew: The Quest for Planet Nine. The insert fits sleeved cards. I am using am using 100 µm thick sleeves (Dragon Shield). The insert offers space for tokens, that are enhanced by token cases such as…
These can-sleeves should be printed in TPU filament for best fit and flexibility, but you can print in PLA or other hard filaments and adjust as needed. You ever have a drink can with the bottom bulging outward? This can-sleeve accounts…
Designed to hold one Skip‑Bo card set with plastic sleeves. There are indentations on the inner walls, so the game manual will also fit inside the box. There are holes at the bottom and at the end of each section, which, in my opinion,…
I didn't feel like mangling some bearings, so I substituted in some steel sleeves, and they work great. https://www.aliexpress.us/item/3256807345926314.html I bought 4x of the 8x10x7 sleeves, and changed the diameter of the printed top…
An organization solution for Twilight Imperium 4th Edition + Prophecy of Kings + Twilight's Edge expansions that supports sleeved cards. Borrows a few models and inspirations from leeoneil's solution. Box lift is likely going to be about…
Hi! I made this little sleeve because I wanted a ultra low profile usb-c adapter that I found on Aliexpress for my YubiKey 5 NFC. It's super slim to carry unlike any other usb-a to usb-c adapters I've used. I haven't tested it on any…
If your screw posts are broken off it can be tricky to screw your breadbin case back together. These sleeves are designed to slip over the top of the stump of the broken post and be glued in place, repairing your beloved old brown…
Deck box for Standard (2.5x3.5 inch) Cards. Fits 60 cards in premium sleeves. External dimensions are 101x74x38 mm. Printed with .4mm first layer, .2mm layers no support
This is the latest deck box we offer and the following is all the print setting. This deck box can hold 100+ double sleeved cards. Total number from testing is 133 total.
We love Stamp Swamp and wanted a low cost insert that could be expanded (if there expansions with more stuff). The quantity of the trays is in the file name. You will need 5 total trays and 5 lids. 3 of the trays will not have card side…
1.2 Update: fixed corners and length of the top and bottom tabs. Wanted to store my old Pokemon TCG cards in nice boxes instead of being tied by rubber bands. Found this design and remix but they are a bit loose and the coin design…
I have created a support sleeve for the FetAmp by Thomann for the use with a Shure SM7B. This barrel amp plus an XLR cable can be a quiet long and fragile structure. This sleeve has three inner diameters and one hole for the XLR lock.…
User recreation of the Sienci sleeves that goes over the metal spindle clamp. Two are included. Keeps the spindle from being scratched. Designed for 80mm spindle. I increased the space inside the sleeve from Sienci's in order to allow the…
The decorative BIC lighters will be a very snug fit. I recommend the solid color options or remove the decorative film.
This is a single‑piece insert for the Virus! card game with Virus! 2, Halloween and Virus! Roll & Write, designed for sleeved cards. The base Virus! deck is split into two longer compartments, Virus! 2 has its own section, and Halloween +…
I desinged this stick cover for the radiomaster pocket since I wanted to have more controll. It fits snuggly over the original metal sticks, no hardware needed. I made it to fit around 8mm sticks.
A box to hold all cards of the HeroQuest base game with the cards in Dragon Shield sleeves
This is an organizer for the board game Graft by IV Studios. It supports sleeved cards, but specifically Dragon Shield sleeves . I'm sure other sleeves would work, but I couldn't account for them as the margins in this box are very tight.…
Modified some dimensions to make this suitable for sleeved cards
simple vice sleeves, glue in 20x3mm magnets .f3d added to modify magnet holes for gripping soft materials and threads without scratching
Simple Field Notes or similar notebook sleeve that will hold a 3.5x5.5 pocket notebook.
Overview BottleKeep is a compact, knit-style travel bottle sleeve designed to keep 1oz bottles close at hand and protected throughout the day. It’s made for everyday carry — clipped to a bag, tucked into a workspace, or set on a desk…
I wanted some additional range magazines for my P-01. I knew that the CZ 75 magazines fit in the P-01 magwell, but I couldn't find any appropriately sized mag sleeves. Technically you can use them without a sleeve, but you risk bending…
I wanted some additional range magazines for my B6C. I knew that the CZ 75 magazines fit in the B6C magwell, but I couldn't find any appropriately sized mag sleeves. Technically you can use them without a sleeve, but you risk bending the…
A storage holder for your Sleeves, Toploaders and semi-rigids!
I made these plugs and reducing sleeves for electrical conduits to measurements in the international system. The plugs are for 90mm, 75mm and 40mm ducts. The reducing sleeves are 20-40mm and 20-25mm. Recommended printing in PETG minimum…
Key shaft sleeve to stop the sharp edges scratching paintwork Printed in TPU. Flat face to bed, no supports required.
A simple key sleeve for the Oxford Alpha AX14 Alarmed disc lock. To stop the sharp key shaft scratching paintwork. Made from TPU flex. Prints with the flat along the tail on the bed. No supports required
3D printed sock to put over your Tablet S-Pen (tested with Tab S7 FE) to make it more ergonomic. Printed in PLA with stock 0.2mm Profile with Brim enabled, orientation as in the file.
I printed it in PET-GF with a .6 nozzle. If would def look better at a higher resolution.
I made this dampener/bushing/sleeve for my HÅG H05, as the original one was worn and, and it started to make a lot of noise because of the metal on metal. This also means, that the rod that holds the chair in place, was starting to wear,…
Ergonomic grip sleeve for the Rhinowares Mini Coffee Grinder , improving comfort and control during hand grinding. The rounded outer shape gives a secure hold, especially with finer settings that require more torque. A slim top slot lets…
High-End Deck Protection | 80+ Premium Edition Upgrade your storage with a deck box designed for durability and flexibility. This edition is perfect for competitive 60-card formats (Standard, Modern, Legacy, Pioneer, etc.). 📦 Capacity &…
A handle or sleeve with switches to connect to an 18V Ryobi for launching model rockets Instructions Print the parts (one of each except 2X glue rings). Glue the sleeve to the clip plate and reinforce by gluing one ring at the bottom. Use…
The sleeves that came with the machine degraded rather quickly (ripped apart). Designed these sleeves based on the original and they fit perfectly on the machine. I don't know how long this will last in the long term, but for the time…
This protective sleeve was designed to fit over the IKEA Kungsfors magnetic knife holder. The sleeve prevents knife edges from making direct contact with the metal surface, reducing the risk of chipping when placing or removing knives.…
No photo because it stays at work. Maybe I will add it later. With TPU it fits like a glove and works great on a keychain. Holds up better than the original mount hole.
Sleeve to protect documents. I designed this sleeve to be specifically for Polish car registration documents (73 x 105mm) but feel free to scale it to fit your needs. TPU works best. The two part need to be glued together, for that I've…
There is one of everything except for the mat component which needs 2x (labeled as 2x). The title of each file should represent what I store in each, but nothing is too tightly confined that you can't find a layout that makes sense to…
MTG Commander Deck Box – 100 Double-Sleeved + Commander Display A clean and functional MTG deck box designed specifically for Commander (EDH) players. This modified design securely holds: ✅ 100 double-sleeved cards ✅ Commander card in a…
Sleeve for WIKA 28mm gauge. Adding a layer of protection to your gauges. Also adding a bit of stealthy look, if not preferring bare polished brass of wika gauges.
This model lets you customize your Nespresso Essenza Plus Reservoir Sleeve while still seeing the water level. It does not require supports. I used an ice blue PLA filament, but anything will do.
The Odalin core box's card tray isn't large enough for all sleeved mini-euro cards, even when using the sleeves bought in the crowdfunding campaign for the game. This replacement tray adds an extra mini-euro row to accommodate for all the…
10x1 coin cell battery case remix. you need to download the inner part from the original model . Download " CR2032_10_1_Crate.stl".
Simple Sleeve to grip the tapered shaft of a soldering iron Absolutely not a sponsored post
Simple goldfish sleeve designed for covering sharp edges on wheelchair brake handles (Wolturnus W5) Project Background One of my customers wanted to convert his old wheelchair so he could go fishing . We worked well together and had a lot…
The stock remote for my TCL Q5 series TV was too thin and slippery. Being black it was also hard to see in the dark. Printed this sleeve in Glow In the Dark PLA to find it easily. I believe it should fit models RC923A FMB1 / RC813A FMB1…
My HS65 Corsair headphones broke. cracked right across the top. wouldn't hold pressure any more. I printed this sleeve to cover over it, provide structural support and why not, give it cat ears. Slide on from the left or right, don't try…
sleeve for holding pet during Pultrusion 5mm id 10mm od
A set of key sleeves that fit 24mm diameter keys. I printed the sleeves from TPU to keep them from cluttering in a pocket or purse. They also come in various shapes to help you identify the key in the lock in the dark. They can be printed…
This is an amazing way to keep your cards safe even when your traveling! The top easily slides on and off and it can fit both penny sleeves and top loaders to keep cards in prestine condition! its a super basic print as its essentially…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Hello Kitty Juno Cosplay Sleeves from Overwatch. The supports required.…
this is a super great way to travle wih penny sleeves and top loaders at all time to keep your cards in mint condition! Not only is it great for travel but you can also just bring it along with everyday life! It uses 8 3*5 magnets (3mm…
Inserting your saw-shaped records into an opaque sleeve blindly could leave all the weight of the record on the tip of a saw tooth. Unlike a real saw blade, the vinyl will deform over time. This print slides into a replacement clear…
I found that my Omni Dripper attachment for my XBloom Studio was drooping: The ?ABS? housing had cracked on the underside next to the magnetic coupling and the filter holder was drooping. I modelled and printed this sleeve to slot over…
I use different premium sleeves than js500 and mine are just slightly longer. Specially, both Sleeve Kings Premium Euro Mini and Ultra Pro Euro Mini just barely didn't fit. So I resized both small card holders to fit my style sleeves.…
![Kreel Manor (+2 expansions) boardgame insert [sleeved cards]](https://media.printables.com/media/prints/1030542/images/7821235_276faf54-0f70-45a0-984a-75633e132b54_ec463192-62a6-4ea7-b8a3-f94d8b21f21f/km1.jpg)
![Bug-Safe Motorcycle Jacket Sleeve Vent [remix]](https://media.printables.com/media/prints/f48751c7-c449-44f4-a8f3-4c296a71622f/images/10361833_e9a228e4-bdac-4492-ba9f-cabea344718d_985ed9e5-4ef1-4cb1-a410-919d5915effa/a82639cc-90ea-4e8b-b47f-7488e6d98434.png)
