Raspberry Pi 3B+ Sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done…
- Rating
- 4.929 / 5
- Likes
- 63
- Downloads
- 634
- Makes
- 12
- Views
- 4,641
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done by the community, too.You can find more details here:https://twitter.com/spikeinkent/status/1294704712101527553
The case should have the same thermal properties than the original one and this slim case is not designed for systems with heavy loads.I'm running pi-hole, openHAB, octoPring systems with the original sleeve. I've uploaded several different configurations, but if you want different configurations you can simply manipulate the attached Fusion 360 file.
During the modelling process I've used this file for test fitting tests
- https://grabcad.com/library/raspberry-pi-3-model-b-reference-design-solidworks-cad-raspberry-pi-raspberrypi-rpi-1
- https://grabcad.com/library/raspberry-pi-3-b-2
Different Model?
Raspberry Pi 3B: https://www.prusaprinters.org/prints/10349-raspberry-pi-3b-sleeve
Print instructions
Category: Electronics Summary
Triggered by a community request, I adapted the original case so that it fits a Raspberry Pi 3B +.Test prints are done by the community, too.You can find more details here:https://twitter.com/spikeinkent/status/1294704712101527553
The case should have the same thermal properties than the original one and this slim case is not designed for systems with heavy loads.I'm running pi-hole, openHAB, octoPring systems with the original sleeve. I've uploaded several different configurations, but if you want different configurations you can simply manipulate the attached Fusion 360 file.
During the modelling process I've used this file for test fitting tests
- https://grabcad.com/library/raspberry-pi-3-model-b-reference-design-solidworks-cad-raspberry-pi-raspberrypi-rpi-1
- https://grabcad.com/library/raspberry-pi-3-b-2
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2
Infill: doesn't matter
Filament: - PETG -