1 / 3
Hard drive enclosure for 3.5" HDD and Temu SATA to USB cable — zdjęcie 1
1 / 3

Hard drive enclosure for 3.5" HDD and Temu SATA to USB cable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Jonathan Lui's Hard Drive Enclosure, and adapted it to fit a generic SATA to USB cable available on Temu

Ocena
0 / 5
Polubienia
19
Pobrania
116
Wydruki
0
Wyświetlenia
619
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked Jonathan Liu's Hard Drive Enclosure, but it is specifically designed to accommodate a specific SATA to USB cable that is no longer available on Amazon. I had a different cable, purchased on Temu, and modified the rear case model to be compatible with that cable. I eliminated the retention mechanism for the cable, so the cable can be removed and reinserted, without disassembling the case.

As with Jonathan Lui's design, orient with the hex vented ends against the build plate. I printed the rails upright on the short edge, with a brim for bed adhesion. I printed all four parts 

The SATA to USB cable I designed around is available on Temu:

https://www.temu.com/2--inch-hdd-ssd-adapter-uasp-sata-to-usb-3-0-converter-cable-12v--driver-free-for-laptop-data-transfer-cable-computer-accessory--plugandplay-device--transfer-reliable-performance-usb-storage-dock-tech-enthusiasts-office-workers-g-601102747423392.html

Tagi