1 / 3
Hard drive enclosure for 3.5" HDD and Temu SATA to USB cable — image 1
1 / 3

Hard drive enclosure for 3.5" HDD and Temu SATA to USB cable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of Jonathan Lui's Hard Drive Enclosure, and adapted it to fit a generic SATA to USB cable available on Temu

Rating
0 / 5
Likes
19
Downloads
116
Makes
0
Views
619
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I really liked Jonathan Liu's Hard Drive Enclosure, but it is specifically designed to accommodate a specific SATA to USB cable that is no longer available on Amazon. I had a different cable, purchased on Temu, and modified the rear case model to be compatible with that cable. I eliminated the retention mechanism for the cable, so the cable can be removed and reinserted, without disassembling the case.

As with Jonathan Lui's design, orient with the hex vented ends against the build plate. I printed the rails upright on the short edge, with a brim for bed adhesion. I printed all four parts 

The SATA to USB cable I designed around is available on Temu:

https://www.temu.com/2--inch-hdd-ssd-adapter-uasp-sata-to-usb-3-0-converter-cable-12v--driver-free-for-laptop-data-transfer-cable-computer-accessory--plugandplay-device--transfer-reliable-performance-usb-storage-dock-tech-enthusiasts-office-workers-g-601102747423392.html

Tags