1 / 2
TI Calculator Battery Cover – Replacement or Custom Label with Your Name (No CAD Needed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery cover for the Texas Instruments CAS calculator: Ti-nspire CX II-T
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement battery cover for the TI-Nspire CX II-T calculator.
It may also work with other models, but this has not been tested.
The cover is designed to be personalized with your own name or label – perfect for school use where calculators need to be clearly marked.
- Easy to print: It works even on single-material printers, such as the Prusa MK4 without MMU or the Prusa Mini.
- Customizable: You can add your name or text to make sure your calculator is clearly marked.
- Durable: Your name tag will never fade.
- Nerd bonus
Additional parts needed:
None. You can reuse your original screw.
When disassembling, push the screw out while unscrewing – a little bit tricky, but worth it.
Be careful not to lose the screw.
Print settings:
- Material: PLA or other common filaments
- Layer height: 0.2 mm
- Supports structure: required
- For labeling: Use PrusaSlicer, move the object to X and Y = 0 (same for the text modifier).
Use the text modifier with a minimum depth of 0.4 mm. Be careful to ensure that you use it on the correct surface and in the correct orientation. (https://help.prusa3d.com/de/article/text-tool_399460) - For single-material printers: Use two manual filament changes. →https://www.youtube.com/watch?v=5o_5OkzzzFc&t=165s&ab_channel=Benix