Dripper Nozzle for Cleaning Products on Your Robot Vacuum - Any Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a build of a driper nozzle that can be put in top of any robot vacuum, in order to spread your favorite scent.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
This model is a dripper nozzle mounting that can be placed above any kind of robot vacuum, in order to spread cleaning products or your favorite scent around the house.
Since some robots can wipe, but it's not recommended to use cleaning products, this is an option to wipe using a cleaning product other than just water.
Another way is to use it with the brushes in a lower flux, spreading the product around.
There are 5 parts in total:
- The base - use it with double-sided tape to fix on the vacuum robot
- The reservoir - it's mounted above the base, just slide it in
- The nozzle base - it's a stick to place the nozzle where it fits best for your robot
- The nozzle - place it where it fits best, just slide it in
- The screw - the screw goes in the nozzle, with it you can adjust the flux of your cleaning product
Also, there is a part that is not printed, which is the tube connecting the nozzle to the reservoir. It uses a 4mm hole on both ends, that fits a common PTFE tube that you probably have laying around.