1 / 4
Gutter Rat GR9 Chungus MGN12 XY Carriage Link — zdjęcie 1
1 / 4

Gutter Rat GR9 Chungus MGN12 XY Carriage Link

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A stronger carriage link that used MGN12h for the Y Axis on the Gutter Rat GR9 Ender 6 Conversion.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

When I was building my Gutter Rat GR9, I needed to convert the link to MGN12h (since those were the rails on hand), and I also witnessed a ton of flex with the stock XY-Joiners. Hopefully this solves the issue without having to machine a linkage out of metal.

Print with the flat side to the build plate, and add supports. The bottom will be ugly, but it's going to be strong.

Tagi