1 / 8
Spare wheel holder for Roncato LITE PLUS S suitcase — zdjęcie 1
1 / 8

Spare wheel holder for Roncato LITE PLUS S suitcase

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

4,98 € – 6,09 € netto (bez VAT)

Dla pliku: Suitcase wheel holder_0.4n_0.2mm_PETG_MK4S_4h31m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 5,54 € netto (środek widełek).

Masa podana przez autora
97 g
Czas druku podany przez autora
4,52 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Spare wheel holder for Roncato LITE PLUS S suitcase with A76.063 bearing wheel.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you want, you can support my project on PayPal. I am very grateful for every small donate :) Thank you!

Materials:

  • 2× printed wheel holder
  • 2× printed bearing insert
  • 2× bearing wheel A76.063 (63 × 20 mm)
  • 2× screw M6x32
  • 2× self-locking nut M6

Descpription:

The Roncato LITE PLUS suitcase unfortunately has very poor-quality wheels without bearings. This model lets you print a new holder and use it with A76.063 bearing wheels.

First, unzip the inner lining of the suitcase. There’s a hidden zipper in the middle.

Unscrew both wheels. Each is held by 2 screws.

Next, you’ll need to cut or mill away some areas where the screw head and nut will go, as they are larger than the original rivets.

Wheel preparation:

Insert the bearing insert inside. I recommend printing it from PC-CF for durability, but PETG will work too. This insert ensures the wheel doesn’t wobble on the M6 screw.
Then place the wheel into the holder and secure it with the screw.
Finally, mount the wheels back onto the suitcase.

 

You can download my prepared prusaslicer files for Mk4 or you can use my original *.f3d (Fusion 360 file with timeline), *.STEP or *.STL model for your own custom modifications :).

I recommend this settings for prints:

  • PETG/PC-CF
  • Perimeters: 2
  • Infill: 25 %
  • Supports: yes

Tagi