Asymmetric Bathroom Wall Organizer (keyhole, divider)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Asymmetric bathroom wall organizer with divider. Keyhole screw mount. Prints flat on base, no supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Asymmetric wall-mounted bin with a center divider. Designed for bathrooms (shampoos, sprays, brushes), but works great in kitchens, workshops, and closets. Two keyhole slots on the back let you hang it quickly on screws; a lowered front lip improves access. Rounded corners and thick walls for durability.
Model size (XYZ): 290 × 200 × 101 mm
Footprint on bed: 290 × 200 mm
Print as designed: place the bottom/base on the build plate. No supports required.
Materials: PETG recommended for moisture; ASA/ABS for heat/steam; PLA only for dry indoor use.
I printed mine in Sunlu ABS natural white.
Print Settings
Nozzle: 0.4 mm (but possible to print with 0.6 mm, it could be faster/stronger)
Layer height: 0.2 mm
Top/Bottom: I recommend 6 layers (that way bottom will be solid)
Infill: ~20% (Gyroid or Grid)
Supports: None
Orientation: Bottom flat face on the bed (back with keyholes faces up)
Mounting
2 × pan-head screws Ø3.5–4 mm (use wall anchors if needed)
For wood/particle board: wood screws Ø4 mm
Space between holes is 220mm.
Leave screw heads protruding ~2–3 mm, hook through the wide part of the keyhole and slide down to lock.