1 / 4
Asymmetric Bathroom Wall Organizer (keyhole, divider) — image 1
1 / 4

Asymmetric Bathroom Wall Organizer (keyhole, divider)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Asymmetric bathroom wall organizer with divider. Keyhole screw mount. Prints flat on base, no supports.

Rating
0 / 5
Likes
4
Downloads
39
Makes
0
Views
129
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Share Alike

Asymmetric wall-mounted bin with a center divider. Designed for bathrooms (shampoos, sprays, brushes), but works great in kitchens, workshops, and closets. Two keyhole slots on the back let you hang it quickly on screws; a lowered front lip improves access. Rounded corners and thick walls for durability.

Model size (XYZ): 290 × 200 × 101 mm
Footprint on bed: 290 × 200 mm
Print as designed: place the bottom/base on the build plate. No supports required.

Materials: PETG recommended for moisture; ASA/ABS for heat/steam; PLA only for dry indoor use.
I printed mine in Sunlu ABS natural white.

Print Settings

Nozzle: 0.4 mm (but possible to print with 0.6 mm, it could be faster/stronger)
Layer height: 0.2 mm
Top/Bottom: I recommend 6 layers (that way bottom will be solid)
Infill: ~20% (Gyroid or Grid)
Supports: None
Orientation: Bottom flat face on the bed (back with keyholes faces up)

Mounting

2 × pan-head screws Ø3.5–4 mm (use wall anchors if needed)
For wood/particle board: wood screws Ø4 mm
Space between holes is 220mm.
Leave screw heads protruding ~2–3 mm, hook through the wide part of the keyhole and slide down to lock.