Snapmaker J1 XY belt calibrator STLs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse engineered belt calibrator tools for the Snapmaker J1
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a reverse engineered set of the XY belt calibrators for the Snapmaker J1.
Usually you will have these as a not permanently deletable gcode file in your printer. These ones here are only needed if you cannot use that file for some reason, e.g. because you do not have a 0.4mm nozzle or have exchanged the controller board for another one as I did.
Make sure to follow the printing instructions!
Printing Details
Print with PLA. Print settings need to be chosen in such a way that the bending bar of each part is massive.
The original Snapmaker code uses a 0.4mm nozzle, layer thickness 0.15 mm (1st layer 0.2mm), 4 perimeters, 4 top and 4 bottom layers and 15% grid infill in a 45° angle.