Snapmaker J1 XY belt calibrator STLs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reverse engineered belt calibrator tools for the Snapmaker J1
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 1
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a reverse engineered set of the XY belt calibrators for the Snapmaker J1.
Usually you will have these as a not permanently deletable gcode file in your printer. These ones here are only needed if you cannot use that file for some reason, e.g. because you do not have a 0.4mm nozzle or have exchanged the controller board for another one as I did.
Make sure to follow the printing instructions!
Printing Details
Print with PLA. Print settings need to be chosen in such a way that the bending bar of each part is massive.
The original Snapmaker code uses a 0.4mm nozzle, layer thickness 0.15 mm (1st layer 0.2mm), 4 perimeters, 4 top and 4 bottom layers and 15% grid infill in a 45° angle.