Search results: j1

Counting matching models…

Printables

Gridfinity Bin - Novus J11 Hand Tacker

This is a stackable Gridfinity bin for the Novus J11 hand tacker/ stapler. Storage space for the correct staples is included. The bin has a size of 4x3x4U

Order a print of this model

Printables

Snapmaker J1 Halter für - holder for Duet 3 6HC

----for english, please scroll down---- --- moved from MyMiniFactory --- Halter, um einen Duet 3 6HC-Controller in einen Snapmaker J1 einzubauen. Die Duet wird über Luftkanäle mit einem 5015-Radiallüfter von unten gekühlt. Hierzu muß…

Order a print of this model

Printables

Mounting Cover for Rosahl M-2J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Uses the plug circled in red to connect to the m-2j1r. The power supply can output 3v 3amps which is the requirement to operate from rosahl. You can find it here: https://www.amazon.com/dp/B07N18XN84?ref=ppx_yo2ov_dt_b_fed_asin_title…

Order a print of this model

Printables

Lectron CCS + J1772 to NACS Adapter Holder

This model was designed for CCS + J1772 adapters. Perfect fit for Lectron Vortex and the Lectron 48A Level 2 adapter (Tesla (NACS) to J1772 EV Adapter | 240V | 48 Amp). Designed for PETG for better durability in hot environments.

Order a print of this model

Printables

SSJ1 Warrior Breaking Stone Frame – High Relief 3D Wall Sculpture

This high-detail bas-relief wall sculpture features a Super Saiyan 1–inspired warrior dramatically emerging from a cracked stone frame. The design captures intense facial expression, dynamic spiky hair, and muscular anatomy carved in deep…

Order a print of this model

Printables

Saiyan Warrior SSJ1 – Breaking Stone Frame High Relief Sculpture

This high-detail bas-relief wall sculpture features a Super Saiyan–inspired warrior dramatically emerging from a cracked stone frame. The design captures sharp facial structure, iconic upward spiky hair, and defined muscular anatomy…

Order a print of this model

Printables

Battery Charger Panasonic VW-VBJ10

Please hit the like button if you find this model useful for you. Battery charger for Panasonic VW-VBJ10 -no glue required You will need: Pogo pins 6mm Charger module Li-ion TP4056 type-C Some wires

Order a print of this model

Printables

Dummy socket for J1772 plugs With rain cover

This is a remix of Austin Milne's j1772 dummy socket a rain cover was added and a non screw option was also added. It is used to hold a charger while it is not charging the car.

Order a print of this model

Printables

Yamaha FJ1200 body part

Scanned copy of motorcycle part: https://www.cmsnl.com/products/panel-1_3cv2835u00/

Order a print of this model

Printables

J1774 Pivoting Mount and Cord holder

1/4" x 1" hex bolt with washers and locking nuts are used to attach the piviot to the frame. M4 x 10m screws are used to attached the mount to the cord holder. Printed in PETG on a Core 1 L.

Order a print of this model

Printables

Tesla J1772 Adapter Model S (2015) Trunk Mount

A mount that clips into the trim on the back left side of the Model S trunk. Modeled to clip into the 2015 Model S, it should fit right between 2 ribs in the trim, you can feel underneath the trim to find the position. I'm not sure if…

Order a print of this model

Printables

Guitar Hero World Tour RJ11 mod (PS2 guitars)

As I've modded more guitars I realized my previous adapter for World Tour guitars didn't fit PS2 ones. So I made another specifically meant for PS2 guitars as I mod a lot of those now. Basically when I run a cable/dongle in my modded…

Order a print of this model

Printables

Snapmaker J1 Recirculating Activated Carbon Air Filter Purifier

This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…

Order a print of this model

Printables

Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger

Jimny Suzuki Type J1 - J4 - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize/scale to adjust dimensions All our designs are free to download and use. Your support fuels our creativity. If you downloaded and enjoyed…

Order a print of this model

Printables

J1772 Charger Holder with Extra Mounting Holes

V3 of Ken's great J1772 Charger Holder model with extra mounting holes

Order a print of this model

Printables

Snapmaker J1 IR camera mount

Camera used: OV5647 175° Night Vision 5MP Automatic IR-CUT https://www.aliexpress.com/item/1005006051584962.html

Order a print of this model

Printables

DEWALT On/Off Knob (DXAEJ14)

Print as oriented and supports should not be needed, a brim may be necessary to ensure enough build plate adhesion. I printed it at a 45° angle to help prevent the “forks” from shearing off when rotating the knob. I printed with a 0.35mm…

Order a print of this model

Printables

SV08 M12 Probe Sensor Shortened for LJ12A3-4-Z/AX

I modified the original version to allow a bit more space to work with Nadir's CN3D shrouds. To work with the M12 probe. Print in ABS. It will use the same hardware as the original design.

Order a print of this model

Printables

J1772 wall mount

Two-piece wall mount for J1772 car charger plug. Inner piece can be printed in TPU for a nice soft fit, but PLA or PETG for the whole thing works.

Order a print of this model

Printables

J1772 CCS1 EV Charger Wall Mount Holder with hex back

This is provides a wall mount holder for a J772 CCS 1 EV Charging cable. I used this video to modify the original https://www.printables.com/model/460807-j1772-ccs1-ev-charger-wall-mount-holder as I had issues with ABS prints on my MK4S…

Order a print of this model

Printables

J1772 charge holder cable storage

Storage for J1772 EV charge cable.

Order a print of this model

Printables

J1772 EV Charger Wall Mount Holder Remix

This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than 3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in. Features: No holes in your wall! The wall mount…

Order a print of this model

Printables

Hemera Fan Mount for LJ18A3-8-Z/AX Inductive Bed Probe

I wanted a better mount for my LJ18A3-8-Z/AX inductive bed sensor, so I made one which mounts directly to the fan of my Hemera extruder. The bed probe offset ended up being x: -22, y: -40.

Order a print of this model

Printables

Mounting Cover for Rosahl M-3J1R Electric Dehumidifier Membrane based Filament Drybox

This is a mounting cover/frame for a Rosahl M-3J1R electric dehumidifer membrane which can be used for a filament drybox of around 50-70l for multiple spools. Along with a USB-C power supply module it's a convenient and low power…

Order a print of this model

Printables

Outside Mounting Cover for Rosahl M-3J1R Electric Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Please see my updated version of the Rosahl M-3J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Order a print of this model

Printables

Pioneer CDJ1000MK3 Stand

I remixed this stand : https://www.thingiverse.com/thing:2627017 to feat with my CDJ1000 MK3 weight and use existing holes and screw to pin the player to the stand. Print Settings Printer: TEVO Tarantula Rafts: No **Supports:** No…

Order a print of this model

Printables

3DW osVAC Adapter for Makita DPJ180 /PJ7000

This 3DW osVAC Adapter for Makita DPJ180 /PJ7000 replaces the original hose connector. You must transfer the o-ring of the original adapter to this osvac adapter. Lubricate the adapter with a little grease and insert it. In the pictures…

Order a print of this model

Printables

LJ12A3-4-Z/BX mount

Mount for LJ12A3-4-Z/BX sensor Print Settings Rafts: Doesn't Matter Notes: ABS preferred Category: 3D Printer Parts

Order a print of this model

Printables

Snapmaker j1/j1s fanduct

remix

Order a print of this model

Printables

Snapmaker J1 tophat

Tophat upgrade for Snapmaker j1 printer. The aluminium parts were cut from the old back non ventilated plate. The corners are printed from ASA, and 4mm thick glass is placed on top.

Order a print of this model

Printables

Tesla J1772 Adapter Holder

My home car charger frequently swaps between a Tesla and a Leaf, and I didn't have a good place to hold the adapter. Looking online, I didn't find a lot of options so decided to make one. I will say, if you're looking for one, this one at…

Order a print of this model

Printables

J1772 EV Charger Mount and Cable Hook - Remix

Added a little update to this one: Strengthened structure in the cable hook area and updated for using 2 bolts rather than countersunk screws. Also made the back plate more robust. Probably overbuilt for most people… 7mm through holes.…

Order a print of this model

Printables

DIN holder for RJ12 splitter

Simple holder for mounting the splitter RJ12 on a DIN rail. https://tinycontrol.pl/en/accessories/boards/rj12-splitter-4x1w-1xi2c/

Order a print of this model

Printables

Snapmaker J1 J1s SnapDryer Polydryer Rear Mount

Previously I had a Sunlu S1 Drybox mounted to the rear of my J1, but recently I upgraded to the Snapmaker SnapDryer (aka Polymaker Polydryer ) and were able to fit both the dryer itself with two storage boxes to the rear of the machine.…

Order a print of this model

Printables

Custom "Grippy" Fluid Dial Pendant Cases (RJ12 connection version)

I remixed Bart Dring's RJ12 case for the Fluid Dial Pendant which uses and connects to Fluidnc controllers using this RJ12 kit . I added grippy textures to improve handling and aesthetics. I have included the .step files for you to…

Order a print of this model

Printables

Outside Mounting Cover for Rosahl M-2J1R Electric Dehumidifier Membrane based Filament Drybox or AMS

Please see my updated version of the Rosahl M-2J1R mounting cover , which simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and…

Order a print of this model

Printables

J1772 EV Charging Cable and Plug Holder Remix

J1772 Charger Holder designed by Ken . This is a great design with a slim profile perfect for an area with limited space. I just added higher cable holder walls similar to trentik's remix , and rounded the corners. Print in the…

Order a print of this model

Printables

Stackable Gridfinity Holder for "ZoeRax" RJ45/RJ11 Cable Crimper

The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.

Order a print of this model

Printables

Ninja NJ100 Chopper Bowl TPU Replacement Ring

My Ninja NJ100 chopper had the original non slip ring break and I hated the noise that the bare chopping bowl made so I quickly threw this together. It doesn't quite fit as nicely as the original one did but beats having to put the…

Order a print of this model

Printables

Support rail din Tuya Smart meter PJ1203A

Il s'agit d'un support pour installer un Tuya smart meter dans un tableau électrique, Aucuns paramètres spécifiques nécessaires.

Order a print of this model

Printables

VW Golf MK4 1998 2004 headlight cover cap 1J1941607B vweld

I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!

Order a print of this model

Printables

Tamiya Top Force J1 steering arm

J1 arm for Tamiya Top Force for J8 arm see https://www.thingiverse.com/thing:4968354 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2um Infill: 20% Filament: Prusament PLA or ABS Black Category:…

Order a print of this model

Printables

Trendnet RJ45/RJ11 Crimp Tool Gridfinity

A shadow board gridfinity bin for a Trendnet RJ45/RJ11 crimp tool.

Order a print of this model

Printables

RJ11 Plate

Need a replacement for my RJ11 socket plate, didnt find one so im uploading for anyone who needs. Made a version that allows an Ethernet cable to pass through the junction box. Measures: 81 mm x 81 mm

Order a print of this model

Printables

Daihatsu Terios J100 Toyota Cami Licence Plate light cup

One of the cup for the licence plate light was missing so I reverse engineered the remaning one for a replacement. I printed mine in transparent PETG without any support and in the orientation of the stl file. My car is a first series…

Order a print of this model

Printables

Snapmaker J1 Door Seal

Even the Voron 2.4 have some air leak from the Z gear motor assemble so you can't seal the door completely. Monitor your temperature printing. I have only had the Snapmaker J1 for a week and this is my first modification to help printing…

Order a print of this model

Printables

Tesla NACS to J1772 holster adapter

Insert this adapter into the holster on your Tesla Wall Connector so you can leave the J1772 adapter on the end at all times. Useful if you have a Tesla charger but your primary EV is not a Tesla.

Order a print of this model

Printables

Abdeckung und Halterung für M-2J1R und Stromversorgungsmodul

Abdeckung um versehentliches beschädigen der Membran zu verhindern und das Stromversorgungsmodul V-REG2 montieren zu können. Der Bügel kann ohne Support gedruckt werden. Bei mir zumindest gab es keine Qualitätseinbußen. Zusammenbau:…

Order a print of this model

Printables

Trustfire TR-J18 8000 lumen Lygter Holder

Lygter Holder til: @Trustfire TR-J18 8000 lumen. Opsætning med både skruer og strips. @Laghøjde: 0,25 @@Perimeter:: 4 @@Infill: 25% @64gr. 5 Timer 50 minutter

Order a print of this model

Printables

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v1

Modeled for the Bolt EUV charge port. Dimensions to check if your charge port is compatible: 83mm tall From the apex/top of the curve, to a bottom edge of the cover 86mm wide Edge to edge 135.088mm radian (overall curve) Purpose: Cover…

Order a print of this model

Printables

Bolt EUV - J1772 / CCS1 Charge Handle Cover - v2

Bolt EUV J1772 / CCS1 charge handle cover. Version 2. Used to keep snow, ice, rain off he latches (on handle, in port).

Order a print of this model

Printables

Snapmaker J1 Electronics Case

This is an electronics case that I designed for my Snapmaker J1. It attaches to the rear of the machine and wires are fed through the square hole where one of the filament holders is supposed to go. It is designed to house a Raspberry Pi,…

Order a print of this model

Printables

Snapmaker J1 Loft & Upgrades

Loft: Loft floor is raised 100mm above top of printer to prevent sharp bends in filament path. Loft is fully enclosed to keep humidity down, and also to keep heat in the print chamber below. There is a temp/humidity sensor in the loft and…

Order a print of this model

Printables

Gridfinity Bin - Novus J11 Hand Tacker

This is a stackable Gridfinity bin for the Novus J11 hand tacker/ stapler. Storage space for the correct staples is included. The bin has a size of 4x3x4U

Order a print of this model

Printables

UNDERWATER LASER - ARCHON J1

3D Model of ARCHON J1 Green Beam Diving Light I've created this model for those who wish to create or study (through CAD Softwares) some laser fixtures for underwater accessories or other. Files : - STL - STEP Thanks for your feedback.…

Order a print of this model

Printables

Aktive Trocknung M-1J1R für (Ikea) Trockenbox

Gehäuse für M-1J1R Luftentfeuchter und Zigbee Hydrometer Sonoff ZNZB-02D. Das Gehause wird an eine Filament Trockenbox montiert und senkt die Luftfeuchtigkeit bei Anzeige der Temperatur und der aktuellen Luftfeuchtigkeit in der…

Order a print of this model

Printables

J1772 Adapter Holder

I needed a way to store this J1772 (car) -NACS (charger) charging adapter in my garage so I drew this up. I have a simple adapter that doesn't have a latch on the J1772 end, so it may not work with an adapter with a latch. It fits the…

Order a print of this model

Printables

Pacojet PJ1 air pressure auto relief bracket

In the newer Pacojet models, the air supply can be turned off via the menu. However, in the older PJ1 model, air is always pumped because the pump is mechanically connected to the motor. This bracket solves the issue by keeping the air…

Order a print of this model

Printables

J1772 Connector Icon

Just a simple cutout of the J1772 connector for use on signs or whatever you please. I modified the SVG from Wikipedia to be printer friendly with this STL. Personally using this to make signs to identify electric chargers at my…

Order a print of this model

Printables

Snapmaker J1 PTFE Guide

I like the original model, but I thought there could be some small improvements. I didn't like that I needed to stop the print to add the bearings. I also thought the original print was a little too loose when installed. There was also a…

Order a print of this model

Printables

New Mounting Cover for Rosahl M-1J1R Dehumidifier Membrane based Filament Drybox

This is an updated version of the M-1J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Order a print of this model

Printables

New Mounting Cover for Rosahl M-2J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

This is an updated version of the M-2J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Order a print of this model

Printables

New Mounting Cover for Rosahl M-3J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

This is an updated version of the M-3J1R outside mounting cover . It simplifies overall assembly, especially the USB-C power supply module can be assembled in advance (or ordered fully assembled!), snap-fits into its compartment and no…

Order a print of this model

Printables

Nissan Qashqai J11 silhouette / keychain

Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! You can add a nice-looking keychain or a silhouette of a Nissan Qashqai SUV for both cases. 0,4 nozzle 0.2mm layer, 2 walls No support needed. I…

Order a print of this model

Printables

8mm Rod for MN J1 Spool Holder

Someone asked if they could print the rod rather than using standard aluminum stock. I didn't have any lying around either so I just made this really quick for the Snapmaker J1 Spool holder from MN. I printed it in ASA and was plenty…

Order a print of this model

Printables

J1772 Square base

Re-mix to a square base to match my application. Removed the cable holder. Distance between holes is 52mm. I uploaded the Step file to make it easier to change

Order a print of this model

Printables

J1772 EV Charger Dummy Socket

A dummy socket for docking your J1772 style EV charger when not in use. Say goodbye 👋 to the plug dangling on the ground and getting dust, dirt, water, and snow in it, “Click” it into this dock and save yourself the headache! Designed to…

Order a print of this model

Printables

J1772 Style EV Charger Dust Cap

Just a simple cap to protect your J1772 style EV charger plug from getting dirt, dust, and debris in it. Useful for keeping the plug protected when traveling with a Level 1 charger. Snap on the cap, toss the charger in your trunk, and…

Order a print of this model

Printables

Snapmaker j1 /j1s filament spool holder

You will need to mirror and print 2 mounting pieces, and 4pcs 3x6mm screws. I recommend using pedg filament or abs

Order a print of this model

Printables

eGolf J1722 Connector Reinforcement or repair for broken plastic tabs

eGolf have notoriously weak J1772 connector and break at the tabs. Mine were broken and I planned on the fix, and it would need some reinforcement. Below is the final result. A couple corners needed hacksawing to avoid interference with…

Order a print of this model

Printables

Replacement Wall Mount for Waterproof Shower Phone Holder (Model B09PRCJ1W8)

This STL file provides a replacement wall mount designed to match the original dimensions of the waterproof shower phone holder, model B09PRCJ1W8. Over time, the adhesive backing of the original mount may lose its grip, especially in…

Order a print of this model

Printables

Handle for GW40-PRJ1 ULTRA floodlight

Early revisions of the GW40-PRJ1 ULTRA floodlight do not include a hook/mount. This model is a replica of the hook used in newer revisions. No additional screws are required. Simply print two parts using a heat-resistant filament (e.g.,…

Order a print of this model

Printables

4jj1 keychain

keychain using makerworld generator. if you print this please put up a picture as I haven't got a multicolor printer yet

Order a print of this model

Printables

Karcher Snow Foam FJ10 bottle adapter and funnel

Simple adapter that allows the use of PET soft drink bottles to be used with the FJ10 snow foam nozzle. With this you can use any 3rd party snow foam or detergent in your lance. You may need to extend the pickup hose to reach the bottom…

Order a print of this model

Printables

"ZoeRax" RJ45/RJ11 Cable Crimper Case

A simple case for the ZoeRax network cable crimper

Order a print of this model

Printables

Rivian Center console Nacs Adaptor holder Mashup DCFC and A2Z Stellar j1772 plug.

Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.

Order a print of this model

Printables

GPS Pole mount (Quectel YEMN926J1A 5G antenna)

So I redesigned the antenna mount to fit a 5G antenna, and fit around a 4,3cm metal pole. I used for 4x m8 bolts, washers and nuts to mount it securly to the pole. I setup my printer with the following settings (to make it even stronger,…

Order a print of this model

Printables

osVAC - Makita DPJ180 - Akku - Flachdübelfräse

Für die neue Flachdübelfräse von Makita in unserer Seniorenwerkstatt wurde der Adapter an das vorhandene osVAC - System angepasst.

Order a print of this model

Printables

Guitar Hero Wii Les Paul RJ11 Cable Retainer (For Modded Guitars)

After I bought the RetroCultMods solderless kit, I got tired of seeing the cable hang out of the big square hole where the RJ11 port used to be. So I decided to design this to solve that problem. I used the original screws that came with…

Order a print of this model

Printables

Tesla Model 3 or Y Trunk Charging Adapter J1772 Holder

I found this adapter on thingiverse and I love being able to grab my charging adapter quickly and easily right inside the driver’s side of the trunk. Plus, it required no drilling or modifications to my model Y as that triangular opening…

Order a print of this model

Printables

SJJ1 Tripod Heart Screw Fork Nivel System / widełki śruby sercowej

I prepare simple model for spare part for leveling tripod SJJ1 made by Nivel System.

Order a print of this model

Printables

J1772 Plug Holder

This model lets you unplug your EV's J1772 charger and store it on the wall of your garage. No hooks, no dangling cables – this model takes advantage of the J-type plug's attachment mechanism. Use three screws to attach to a wall – I used…

Order a print of this model

Printables

Cover for Trunk Light for Daihatsu Terios J100

Replacement cover for a 1997 Daihatsu Terios J100 Trunk Light. Is a little different from the original part - have fewer angled walls - but it fit without problems. I printed mine with translucent PETG 0.1 layer hight. It require only a…

Order a print of this model

Printables

Rubbermaid Fasttrack J1772 Mount

This is a J1772 mount that will attach to the Rubbermaid Fasttrack system.

Order a print of this model

Printables

Snapmaker J1/J1S front bed latch

Recently the front plastic on the bed latches broke on my J1S and made a quick model of the one that was still completely together. It, too, broke today so I was able to get them both replaced. Using the mirror function on the J1/J1S will…

Order a print of this model

Printables

AR4 robot J1 Limit switch cover - New version

Cover designed as an addon to the AR4 Robot (Annin Robotics) to protect J1 limit switch. especially against main cables when J1 is fully moved. To install, drill 3mm holes, remove the M3x14 Philips pan head screws on the J1 limit switch…

Order a print of this model

Printables

Partron DMJ1538HPC DUPLEX FILTER

3D model for the Partron DMJ1538HPC DUPLEX FILTER

Order a print of this model

Printables

Hand Grip for Nikon J1

This is a hand grip for the Nikon J1. It's a small device, but hard to get a positive purchase for extended periods of time. The grip is secured to the camera with the tripod screw. You may use a threaded heat insert to relocate the…

Order a print of this model

Printables

Pole mounted J1772 EV charge plug holder

A pole mounted J1772 EV charge plug holder. The design mounts to a 4' long x 1-½"⌀ pole that can be installed onto a weighted umbrella base. Permits storage of charger connector on the driveway near vehicles rather than attaching to a…

Order a print of this model

Printables

2x5015-Lüfterdüse für - 2x5015 fan duct for Snapmaker J1

— moved from MyMinifactory --- Update: added a correct version for the right hand hotend - simply mirroring the exisiting part resulted in the wire cutout to be on the wrong side. The left hand part is unchanged except for one removed…

Order a print of this model

Printables

Kabelknickschutz für Y-Achse - cable kink protection for Y axis Snapmaker J1

--- for english, please scroll down --- --- moved from MyMiniFactory --- Beim Snapmaker J1 werden die schwarzen Kabel an der Y-Achse bei jedem Verfahren an der Kabelbride abgeknickt. Dies kann über kurz oder lang zu Kabelbrüchen führen,…

Order a print of this model

Printables

3D model of Snapmaker J1 Hotend module

--- moved from MyMiniFactory --- Nothing to print here This is just a precise 3D remake of the original Snapmaker J1 hotend module. I tried to keep the design as close to the original part as possible to enable everyone to use this freely…

Order a print of this model

Printables

Snapmaker J1 Filamentführung - filament guide

--- for english please scroll down --- --- moved from MyMiniFactory --- Ein kleines Update für die Filamentführung des J1, die den scharfen Knick über dem Hotend beseitigt und ein Einführen des Filaments ohne Abziehen des…

Order a print of this model

Printables

Snapmaker J1 Halter für - holder for Duet 3 6HC

Order a print of this model

Printables

Snapmaker J1 XY belt calibrator STLs

This is a reverse engineered set of the XY belt calibrators for the Snapmaker J1. Usually you will have these as a not permanently deletable gcode file in your printer. These ones here are only needed if you cannot use that file for some…

Order a print of this model

Printables

Adapter Makita DPJ180 / PJ7000 to Bosch Click and Clean

Vacuum Adapter: Makita Biscuit Jointer to Bosch Click and Clean System. You will need an O-ring with a 25 mm ID and a thickness of 1.5 mm, which belongs in the smaller groove. To print a nice, sharp bottom surface for the inner lip, I…

Order a print of this model

Printables

LJ12A3-4-Z/BX Inductive Proximity Sensor mount

LJ12A3-4-Z/BX Inductive Proximity Sensor mount Category: 3D Printer Accessories

Order a print of this model

Printables

Mounting Cover for Rosahl M-2J1R Dehumidifier Membrane based Filament Drybox or Bambu Lab AMS

Order a print of this model

Printables

A Rocket by Timofij101

Warning: A leg can breake!!

Order a print of this model

Printables

Makita DPJ180 - SHOPVAC CAMLOCK adapter - 3DW

The Makita DPJ180 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the Makita DPJ180 18V LXT Biscuit Jointer to the SHOPVAC CAMLOCK vacuum system.

Order a print of this model