3D model of Snapmaker J1 Hotend module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not for printung, but for designing your own parts: a model of the Snapmaker J1 hotend module
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
--- moved from MyMiniFactory ---
Nothing to print here
This is just a precise 3D remake of the original Snapmaker J1 hotend module. I tried to keep the design as close to the original part as possible to enable everyone to use this freely as needed for your own designs.
Only the fan is somewhat simplified and the nozzle is modelled to reflect a Bondtech MK8 nozzle since I expect most users to throw out the original nozzle sooner or later. Expected measurement error should be well below 0.1mm. If you find a deviation, please leave me a note.
Mirror the model to get the left side hotend.