1 / 4
Hand Grip for Nikon J1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable hand-grip for the Nikon J1
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 57
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hand grip for the Nikon J1. It's a small device, but hard to get a positive purchase for extended periods of time.
The grip is secured to the camera with the tripod screw. You may use a threaded heat insert to relocate the tripod mount that the grip will take the place of.
There is a mounting protrusion that sits in the hard-wire battery flap, so that will protrude ever so slightly with the grip exposed.
Bill of Materials
- ¼" Tripod Screw Quick Screw Adapter - (Amazon affiliate link)
- ¼-20 Threaded Heat Insert - (Amazon affiliate link)
Print and Assembly Instructions
- Print the model right side up, with the grip pointed up wards. (I used PLA filament.)
- Infill: 100%
- Walls: At least 4
- Supports: (Important) Use normal supports.
- Using a soldering iron, insert the heat set threaded insert into the bottom of the grip. Ensure it sits flush before allowing it to cool.
- Place the grip onto the camera, and then use the quick screw adapter to secure it in place.