1 / 4
Hand Grip for Nikon J1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable hand-grip for the Nikon J1
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hand grip for the Nikon J1. It's a small device, but hard to get a positive purchase for extended periods of time.
The grip is secured to the camera with the tripod screw. You may use a threaded heat insert to relocate the tripod mount that the grip will take the place of.
There is a mounting protrusion that sits in the hard-wire battery flap, so that will protrude ever so slightly with the grip exposed.
Bill of Materials
- ¼" Tripod Screw Quick Screw Adapter - (Amazon affiliate link)
- ¼-20 Threaded Heat Insert - (Amazon affiliate link)
Print and Assembly Instructions
- Print the model right side up, with the grip pointed up wards. (I used PLA filament.)
- Infill: 100%
- Walls: At least 4
- Supports: (Important) Use normal supports.
- Using a soldering iron, insert the heat set threaded insert into the bottom of the grip. Ensure it sits flush before allowing it to cool.
- Place the grip onto the camera, and then use the quick screw adapter to secure it in place.