Liczymy pasujące modele…
Dummy 13 has won 3D Model of the Year! Thank you so much to the judges and everyone who voted. TL;DR This is Dummy 13, a printable action figure. It was a work in progress for a while and now this is the finished product. It's still a…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
Chances are you’ve heard about ocarinas thanks to the Nintendo game The Legend of Zelda: Ocarina of Time, whereas the name suggests, it plays an important role. Print this one in Blue and use to Triforce collar to make it look like the…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This ultra-compact mini whistle is designed for maximum efficiency with minimal material use. Weighing only 0.6g and printing in just 4 minutes , it delivers an impressive 100 dB sound output (measured via smartphone app). Perfect for…
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…
Video by Teaching Tech - Teaching Tech was kind enough to make a review of this Bench Mountable Vise. It has some great info on downloading and assembling this design. !!! LUBRICATION: This design will not work without lubrication. I use…
Create your own battle droid army and take over the galaxy! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks!…
NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
BOM: Printed with ROSA3D High Speed PLA Dark Blue This is the "Powerhouse" edition of my octagonal battery holder system. These 4-row wide grids are designed specifically for large-scale energy storage projects, such as home powerwalls,…
Printed from Ultra PLA by Noctuo Printed from Ultra PLA by Noctuo. Filaments: -Black PLA UltraPLA -Yellow PLA UltraPLA -Wood Ash PLA Spectrum Printed on Bambu Lab P1S and AMS I recommend printing the base from transparent PET-G with…
Summary This is a model of a 1965 Lincoln Continental Convertible Limousine in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels…
This is a 1"-8 UNC hex nut and an assortment of hex bolts in various lengths. These models have actually been printed and tweaked to operate with similar clearances to real metal nuts and bolts I got from McMaster-Carr. Obviously, don't…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - it comes with a aditional/optional seal for ataching to rough surfaces…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, Top Rail, and Foregrip, alongside more space for the ESC. 23/03/2026 Updated to match latest V1.2 Rail Top Full changed to accomodate changes made in MS-GnK V1.2 11/08/2025…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
A fully parametric OpenSCAD reducer designed to connect a ~4" duct to a ~2.5" outlet. I built this to adapt the exhaust from a Creality Falcon A1 (~60 mm ID) to an AC Infinity inline fan (~102–103 mm ID). The model uses matched…
This VESA monitor wall mount is designed to be strong, clean, and easy to print. The mount follows the standard VESA 100×100 hole patterns, making it compatible with a wide range of monitors and small displays. The design focuses on…
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
Here i made a over engineered Spool holder for 1 KG spools. I made mine from a steelplate 50mm*125mm*5mm and two 20mm square tubes with a length of 100mm and welded on the steelplate. Give it a nice black coating. With the steelplate and…
Needs tree Supports for the holsters and uses the same settings as the mini 13 model
Stand to mount a Thermaltake PR22-D5 reservoir/pump combo to a 140mm fan (or fan mount). The long axis of the reservoir is offset horizontally from the axis of the mount points, this being designed for mounting to the bottom fans of my…
porta cortinas hecho en fusion360
Крепление для монитора на трубу 25мм VESA 100X100
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
2 Color Model for face-down multicolor printing + Model with color change @2.0mm for single-color printers. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it. (Pictured Right) I recommend…
The motor cover and stator are secured to the motor using the original screws that come with the motor. Motor is a Samsung DE31-00029H. You can also use a DE31-00029K or DE31-00029J or any other 29 motor. Solenoid is a JF-0826. I use the…
I made the railed version first and thought it might be cool to do an Aimpoint T1/2 footprint version (a bit like the real 30mm Aimpoint mounts KAC made) so I designed my own. Designed to fit on the VFC KAC MP5 rail fitted to a WE MP5,…
Unable to mount a mobile radio in a Tesla Model 3 or Y, I designed this bracket to cleanly and unobtrusively mount a radio head and speaker. Also includes a mic hook. Affiliate links below. Print with 100% fill. Assuming you already have…
Assembly Video : https://youtu.be/a_FZUZAboug Accesory Pack for A.D.A.M 01 and E.V.A 01 : https://www.thingiverse.com/thing:6763700 This is a redesign of my previous model E.V.A that I created. It has been downscaled to 1/10 scale or 17cm…
This is a vertical 1 inch template for the pantorouter. It installs and uses the same bit and guide bearing as the factory templates but mounts vertically. It prints easy but will need supports underneath on the bed. The embossed text…
Simple but nice “puzzle”. For a complete figure you will need 5 identical pieces, preferably in different colors. There is also more advance design: V2.0 . Designed to require no supports (if printed like on photos). Brim may help, but it…
Let me introduce you to my modular parkside pbspa 12 cordless screwdriver workstation. Any part can be printed separately and then joined together. There is no need any support with printing.
This model is compatible with the lego system.
This model is compatible with the lego system.
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
Original low-poly model of a Snark from the Half-Life game. It is better to print it on its back with supports for legs. Also check out other Half-Life models: Houndeye , Chumtoad
There are 3 different models: HoundeyeOriginal.stl - original low-poly model of a Houndeye from the Half-Life game Houndeye_WithEyes.stl - version with eyes modeled based on the original texture Houndeye_WithSupports.stl - same as…
There are 2 different models: ChumtoadOriginal.stl - original low-poly model of a Chumtoad from the Half-Life game Chumtoad_WithEye.stl - version with eye modeled based on the original texture Be sure to enable supports for its belly!…
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
3D printed tool to replace Honda Tool 07916 - KA50100 Used to remove and install the steering stem nut on 226 different Honda Motorcycles. The nut I designed this part around is P/N: 53229-MN1-650 You can check fitment by clicking here ,…
Like most 2nd gen S10 pickups and blazers, the plastic dash parts have broken into pieces. The recessed mounting holes on the underside of the steering column panel are a common break point. Rather than buy a whole new panel, I made these…
Hold all cards sleeved. Has room for upgraded player order markers, and the scenario boards. The major stock and revenue markers can be hard to get out in the middle row, but I couldn't come up with a more elegant design that fit. You can…
Liked the design someone else used for a tray, so I cut the X and Y to make it fit the build plate of the A1 mini
This adapts the corner piece of the original file to allow you to mount the filament sensor along the riser. Tony F's File was adjusted to allow the filament sensor to be mounted, the other files were used as references and deserve credit.
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 1hr 30mins on my P1S For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are…
A simple recirculating air filter system for the Qidi Q1 Pro. Reuses existing fans and components to seal off the printer chamber, and remove particles and chemicals from the closed printer chamber during printing. In contrast to other…
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
Mount 3 Ryobi 18v batteries to wall control pegboard using the DDD Printable Wall Control System . Note: If you use the center piece to combine two of these together, the middle batteries will be rubbing together a bit. They fit, but it…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
Ford-Model T Oiltruck 1927 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
Mit dem FoamCutter und ein Dremel lassen sich perfekt selber gemachte Werkzeugeinlagen herstellen. Damit bekommt ihr schnell, einfach und genau den Boden bei eurer Werkzeugeinlage herausgetrennt. Wenn euch meine Arbeit gefällt, würde ich…
Habe lang daran rum getüfftelt, um meine GCM 12 staubfreier zu bekommen. Persönlich würde ich sagen, dass der Adapter bei 95% liegt, aber das ist meine subjektive Ansicht, aber besser wie die Original :-). Die Gummilippe hab ich mir…
(ENG) It happened to me relatively soon that the lighting stopped working on my QIDI Q1 printer. The LED strip was bad. Probably thanks to the high temperatures, who knows... Based on a suggestion by @Damien_304779 I made my own version…
I'm big fan of Dummy 13. I usually print it in 150% for my sons and their friends. I wanted to print “parts on runner” version on my A1 Mini in 150% and faced size issues. It just bigger. So, i've modified runner to fit A1/Prusa Mini…
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.
Table clamp for 10 mm rods. Ideal for setting up physical experiments. The clamp can be used in a variety of ways. Fully customisable thanks to openscad.
Use 2 x M3 screws to mount your ThinkCentre Tiny to your 10 inch rack. The backside ports will be facing you for easy access. The 2 x 2½ drivebays are optional. Verified on models: M920q M920x M720q. I used this SATA controller in the…
This model is compatible with the lego system.
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
It is designed to fit into a Toyota Avalon, that is why it is slightly off-center. A water bottle also fits pretty well down the center area
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
I've been needing a compact yet functional garbage can in my 3D printing workspace for some time, so I decided to design and print one! This waste bin is specifically designed to maximize the full print volume of the Bambu Lab A1 Mini,…
Want to add more capacity to your Zius Mags but don't want to cut the stock spring rest, try this piece! Add a pop of color to your mags and raise the capacity from 12 to 15. Can hold more but wouldn't recommend it. Make sure the first…
This 3D printable model is a reducing adapter designed to seamlessly connect ventilator circuits, such as CPAP hoses, with different diameter requirements. It allows for the adaptation between adult and pediatric hose sizes, featuring a…
Update 2026-02-27: A successor project with label area is now available here Naming Scheme Multiple Inlays for the sorting boxes NORS14 by kistenberg (avail @amazon.de) ready to print. This release contains a set of basic boxes with the…
This is just a simple remix allowing M3 bolts to be used instead of the M4 bolts.
Print as PETG and use tree supporter PLA will crack during the fitting process
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
A remix of 808Asher's design, with an added loop so it can be hung on a holiday tree. Filaments Used Ponyta Regular: Tan: PrintBed Latte https://www.printbed.com/shop/PLA%20Sub/Latte-1.75mm-1kg/ Orange: CC3D Temp Change Orange to Yellow…
ESP8266: https://www.amazon.de/gp/product/B01E3CAVN6/ref=oh\_aui\_search\_asin\_title?ie=UTF8&psc=1 Sensor:…
Holes are sized for #8 screws. Also have a version for 3M adhesive tape. Added a USB cable holder.
I used the OpenSCAD files by @Monniasza_1787141 ( https://github.com/ostat/gridfinity_extended_openscad ) to generate the chest with drawers sized 2x4. The height of the drawer is 32.5 mm I used Overture Matte PLA to print it with 0.2mm…
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
The MP7 is a compact submachine gun used for personal defense. This model is compatible with my modular accesories. For best results print with either .2 or .1 layer hight. PLA and PETG work well.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. Collect all the CarSilhouette!
6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
Silencer for barrel cover and stock for m4/ar15 created by me. Silencer for m14 ccw thread, must be enlarged in X and Y axis by 2% so that the fit is correct. I used m3 imbus screws with a length of 20mm.
A grumpy gargoyle that prints without supports! https://youtu.be/23MjyorK3xk Printing Can be printed in both FDM and resin No supports required Requires minimal infill All Sculptember Models Ghost Mummy Frankenstein Werewolf Dracula…
![Clip-On Filament Roller Guide V2 For Ender 3 S1 [Pro/Plus] (M3 Bolts)](https://media.printables.com/media/prints/1013634/images/7703360_faf4caca-950a-4e85-9664-8e10a2c71f7c_574e6577-6df6-440a-859a-d2afcc79438c/prwb.png)
