1 / 4

Luer lock connectors (straight, gender-switching, slip, and cap)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

chesamo

@chesamo

Connect Luer lock stuff!

Ocena: 5 / 5
Polubienia: 19
Pobrania: 208
Wydruki: 1
Wyświetlenia: 556
Oceny: 1

Aktualizacja u źródła: 7 wrz 2025

Informacje o modelu

Źródło: Printables
Kategoria: Medical Tools
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (13)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (34)

Luer locks are connectors designed primarily for medical purposes (but are used in other industries as well, such as chemistry labs). These adapters allow you to connect two same-gender locks, such as connecting two syringes together (FF) or two sets of tubing (MM). Also included are straight connectors (FM), slip-tip connectors (S), and caps (if you need to close the line). The .scad file can be edited to make the body of the connector longer or shorter, as well as include or exclude the side twist grips.

This model was inspired by, but is not a direct remix of, this model on Printables.

Recommended Print Settings

0.4mm nozzle
0.2mm layer height
10% infill
No supports
Print as oriented

Parameters

side1: Connector type of the bottom side
side2: Connector type of the top side
body: Length of the body (space between connectors)
twistGrips: Include or exclude side twist grips
cap: If set to true, the center of the body will be filled to close off the connection