1 / 4
Luer lock connectors (straight, gender-switching, slip, and cap) — image 1
1 / 4

Luer lock connectors (straight, gender-switching, slip, and cap)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connect Luer lock stuff!

Rating
5 / 5
Likes
19
Downloads
209
Makes
1
Views
559
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Luer locks are connectors designed primarily for medical purposes (but are used in other industries as well, such as chemistry labs). These adapters allow you to connect two same-gender locks, such as connecting two syringes together (FF) or two sets of tubing (MM). Also included are straight connectors (FM), slip-tip connectors (S), and caps (if you need to close the line). The .scad file can be edited to make the body of the connector longer or shorter, as well as include or exclude the side twist grips.

This model was inspired by, but is not a direct remix of, this model on Printables.

Recommended Print Settings

  • 0.4mm nozzle
  • 0.2mm layer height
  • 10% infill
  • No supports
  • Print as oriented

Parameters

  • side1: Connector type of the bottom side
  • side2: Connector type of the top side
  • body: Length of the body (space between connectors)
  • twistGrips: Include or exclude side twist grips
  • cap: If set to true, the center of the body will be filled to close off the connection