Helmet Hanger 1.25in, 1.5in, 1.75in, and 2in tube sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A helmet or headset hanger/hook for utv, jeep, 4x4 etc
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple hinged helmet/headset hanger for utvs or anything with overhead tubes. I included the most common sizes 1.25, 1.5, 1.75 and 2in. I also included the fusion file if you need something different, just update the tube diameter parameter.
Print the top and bottom stl as a single part with multiple parts, supports arent needed. The hinge should break free after the print. I printed them in PETG-CF.
Hardware needed: 1X M3 SHCS 14mm, 1X M5 SHCS 25mm, 2x M5 flat washers 1mm thick 10mm wide, 1 M3 x 4mm L x 5mm OD heatset insert (voron inserts)
one flat washer needs to be driven into the slot on the nut side, the other goes on the bolt side.