Helmet Hanger 1.25in, 1.5in, 1.75in, and 2in tube sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A helmet or headset hanger/hook for utv, jeep, 4x4 etc
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 68
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple hinged helmet/headset hanger for utvs or anything with overhead tubes. I included the most common sizes 1.25, 1.5, 1.75 and 2in. I also included the fusion file if you need something different, just update the tube diameter parameter.
Print the top and bottom stl as a single part with multiple parts, supports arent needed. The hinge should break free after the print. I printed them in PETG-CF.
Hardware needed: 1X M3 SHCS 14mm, 1X M5 SHCS 25mm, 2x M5 flat washers 1mm thick 10mm wide, 1 M3 x 4mm L x 5mm OD heatset insert (voron inserts)
one flat washer needs to be driven into the slot on the nut side, the other goes on the bolt side.