Bracket for Bigtreetech SKR 2 mainboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screw down mount for the Bigtreetech SKR 2 mainboard with tabs to position it with the board in place.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a screw down mount for the Bigtreetech SKR 2 mainboard with tabs to position it with the board in place.
The tabs can be snapped if you do not need them at some later point. Alternatively I provided a version of the part without the tabs to print directly.
This design is part of my frame, bracket and holder collection for various boards and components: https://www.printables.com/@a123qwertz567/collections/2632544
You might want to look on to my seperate fan holders which combine well with this model.
https://www.printables.com/model/395099-60mm-fan-holder-with-extra-low-profile-noctua-nf-a
https://www.printables.com/model/1407869-92mm-fan-holder-with-extra-low-profile-noctua-nf-a
https://www.printables.com/model/1407642-40mm-fan-holder-with-45deg-angle
Print instructions:
- recommended layer height 0,2 mm
- No supports needed
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.