1 / 4
SILICA BOX | filaments and environment for dry printing — zdjęcie 1
1 / 4

SILICA BOX | filaments and environment for dry printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small, practical container for silica gel with micro-perforated closure for air circulation.

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The project

A small screw-top container designed to hold silica gel, which is useful for removing moisture from 3D printing environments. Designed for uncomplicated FDM printing and strong.

Dimensions
  • External diameter:  70 mm 
  • Height: 35 mm
  • Hole diameter: 1.5 mm
What's included (files)
  • Base 
  • Perforated cap
Printing & materials
  • Material: PETG or ABS/ASA. Avoid PLA if exposed to heat/sunlight.
  • Layer: 0.12 mm
  • Perimeters: 2
  • Infill: 15%
  • Seam position: You can position the seam as you see fit
  • Supports: no support
  • Orientation on the printing plane: Place the base with the opening at the top. The cap should be facing upwards with the thread at the top.
Version log

v1.0: initial release – base + perforated cap, STL files included.

If you find it useful, please like it and post a ‘make’!

For requests (variations in the base, cap or branding ), please write me: I will be happy to prepare the variant.

You can also buy me a coffee, and I will be very grateful! =)

PayPal Tip Jar:https://paypal.me/jackala396

Tagi