1 / 4
SILICA BOX | filaments and environment for dry printing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small, practical container for silica gel with micro-perforated closure for air circulation.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The project
A small screw-top container designed to hold silica gel, which is useful for removing moisture from 3D printing environments. Designed for uncomplicated FDM printing and strong.
Dimensions
- External diameter: 70 mm
- Height: 35 mm
- Hole diameter: 1.5 mm
What's included (files)
- Base
- Perforated cap
Printing & materials
- Material: PETG or ABS/ASA. Avoid PLA if exposed to heat/sunlight.
- Layer: 0.12 mm
- Perimeters: 2
- Infill: 15%
- Seam position: You can position the seam as you see fit
- Supports: no support
- Orientation on the printing plane: Place the base with the opening at the top. The cap should be facing upwards with the thread at the top.
Version log
v1.0: initial release – base + perforated cap, STL files included.
If you find it useful, please like it and post a ‘make’!
For requests (variations in the base, cap or branding ), please write me: I will be happy to prepare the variant.
You can also buy me a coffee, and I will be very grateful! =)
PayPal Tip Jar:https://paypal.me/jackala396