Silica gel bead (Dry&Dry) desiccant box for the Chitu FilaPartner E1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desiccant box to hold silica gel beads (Dry&Dry) for the Chitu FilaPartner E1
- Ocena
- 4,75 / 5
- Polubienia
- 30
- Pobrania
- 256
- Wydruki
- 4
- Wyświetlenia
- 805
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A desiccant box to hold silica gel beads (Dry&Dry) for the Chitu FilaPartner E1
The model is for the back-left/front-right corners. For the other two, mirror the print.
Printing:
Prusament PC Blend, Standard Profile, 0.4 Nozzle, 0.2 Layer, 100% infill.
My prints warped a little on the bottom, but it did not affect the fitment.
Note: Cover the hole with your finger and shake the desiccant box to get out any malformed beads.
Note2: When designing this, I was able to turn the entire Chitu box upside down and shake it without any beads falling out. YMMV.
Note3: Also made a 1.8mm version
