Custom Case for JDS Labs Cmoy BB v2.03r Headphone Amplifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printed plastic enclosure designed for the JDS Labs Cmoy BB v2.03r headphone amplifier, inspired by the classic Alt
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom 3D-printed case I designed for the JDS Labs Cmoy BB v2.03r headphone amplifier.
The original version comes in an Altoids tin, but since mine started to rust, I decided to create a plastic enclosure instead. It was also a great opportunity to practice and improve my 3D modeling skills.
The case is designed to fit the Cmoy BB v2.03r board and battery snugly, with cutouts for the potentiometer (VOL), input jack (IN), and output jack (OUT). I’ve added simple labels directly on the case for easier use.
⚠ Please don’t mind the imperfections you might notice in the photos — those are due to the low-quality filament I used for my test prints, not the design itself. With better material, the results should come out much cleaner.
Feel free to customize the case further (different text, symbols, or finishes) to make it your own.
Print settings:
-Material: PLA
-Infill: 15%
-Layer: 0.2mm