1 / 4
Magnetic Screw Tray for 60x10x3 Neodymium Magnets — zdjęcie 1
1 / 4

Magnetic Screw Tray for 60x10x3 Neodymium Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I printed this because the screws in my workshop are always scattered, but now they are a bit more organized.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v3.0

This is a two-part 3D printed screw tray modelled in Onshape. The ‘Base’ holds the magnets, and the ‘Tray’ holds the screws. You can connect them with 4 M3x6 screws. I will also add the .step files for each so you can modify the magnet sizing to fit your needs. If your magnets are popping out, you can use double sided tape to secure them to the Base.

Rafts:

Doesn't Matter

 

Supports: 

Doesn't Matter

Resolution:

 

.2

 

Infill: 

15


Filament:

AmazonBasics White PLA


Profile:

0.20mm SPEED default parameters

Tagi