Precision Lefty Ocho bottom seal removal tool [ reusable • no support • 25% infill ]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The best design currently available for removing the bottom seal on a Cannondale Lefty Ocho mountainbike suspension fork
- Ocena
- 4 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This simple tool will let you easily remove the bottom seal on a Lefty Ocho.
First mount the tool on the Ocho, then use a vice to hold it while you pull/push the echo until the seal gives. It does take a bit of force. Be careful to not scratch the fork on the vice when the seal gives.
It can be printed with just 25% honeycomb infill, no problem. Tested in PETG but I bet it will work just fine with most plastics. If you want to be fancy, maybe print the inner grip at 100% infill since it is so little material regardless—but works either way.
It's designed to be printed without support.
Make sure to print two of each model like in the picture.