Precision Lefty Ocho bottom seal removal tool [ reusable • no support • 25% infill ]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The best design currently available for removing the bottom seal on a Cannondale Lefty Ocho mountainbike suspension fork
- Rating
- 4 / 5
- Likes
- 0
- Downloads
- 41
- Makes
- 1
- Views
- 212
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This simple tool will let you easily remove the bottom seal on a Lefty Ocho.
First mount the tool on the Ocho, then use a vice to hold it while you pull/push the echo until the seal gives. It does take a bit of force. Be careful to not scratch the fork on the vice when the seal gives.
It can be printed with just 25% honeycomb infill, no problem. Tested in PETG but I bet it will work just fine with most plastics. If you want to be fancy, maybe print the inner grip at 100% infill since it is so little material regardless—but works either way.
It's designed to be printed without support.
Make sure to print two of each model like in the picture.