VW Amarok Heater flap arm - Drivers Side
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reproduction of VW Amarok Heat flap arm (Modelled from 2018 v6 Amarok)
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had an issue with the heater flap on my VW Amarok where the gear had sheared off inside off the motor. Upon dismantling the heater flap I managed to break the arm… I couldn't find any of these available online to buy so I had to recreate it as best I could. I am still very new to modelling but the arm works perfectly and has been used in my car for the last 4 months with no issues.
I printed the model on its side to try and give it the most strength at the parts that receive torque. I also printed this in Nylon as I am unsure how hot the area gets when the heater is in use and PLA may not hold up.