Wyniki wyszukiwania: 2018

Ford Mustang GT 2018

This is a remix of https://www.thingiverse.com/thing:3192801 which was fixed to be printable without errors. Enjoy!

Dacia Duster 2018

Dacia Duster memoria

Ferrari SF71H 2018 Formula 1 Car

All credits to the original publisher BMDoubleU . This design has been modified from their original design. This is a tricky print, even with the best printers, I found I got the best results with the settings below. It will still take a…

F1 2018 HALO

Developed from GrabCAD file from Luigi Gabriele Gueli. Added press in mounting points to bottom. Halo fits modified lid well with minor sanding of pegs for tight fit. Have yet to test the nose. Halo is best printed vertical orientation so…

Halloween (2018) Michael Myers' Knife Replica / Prop | 8" J.A. Henckels International Chef's Knife

Halloween (2018) Replica Knife Based on the hero weapon from the movie Halloween (2018), a 8" J.A. Henckels International Chef's Knife, I have modeled a replica of Michael Myers' weapon of choice. Assembly I designed this with ease of…

Doctor Who - Tardis 13/14/15th Doctor EXTERIOR 2018-23 NO SUPPORTS and GLUE

⚫ Tardis 13th Doctor ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…

Dacia Sandero 2018 air vents phone holder - Updated!

UPDATE! the design of version 1 was a bit too brutal, also the air vent bracket clip was not very stable in case of a sudden turn… the new V2 solves both issues. After several iterations I now added a version 2 which looks much better,…

Low Poly 2018 Audi RS7

Welcome to The Low Poly Auto Show! This is a low poly 2018 Audi RS7. Print this model with NO SUPPORTS. Details/fit may not print as intended if the print is scaled up/down. Each remastered model is designed to fit wheels without bearings…

Cup holder for Citroen Berlingo / Peugeot Partner (second generation) 2008-2018

Printed it on a Geeetech I3 with 0.6mm nozzle to cut the printing time. The original model used a hard plastic (PLA/PETG). Tried it with Esun Grey TPU and it turned out acceptable. Used supports but they were tough to remove. Printed the…

Car Cup Holder Phone Dock - 2018 Toyota Camry

This model fits fairly snug in the 2018 Toyota Camry cup holder, but it easily fits in any of the other vehicle cup holders I have tried. The phone in the pictures is an iPhone 6 with an Otterbox case on it, but my Samsung Galaxy S10e…

Yamaha YZF-R6 2018 Wall Art

Wall Art silhouette model of the Yamaha YZF-R6 2018 superbike. Adjustable size. I accept model suggestions.

MacBook Air Stand 2018-2020 (M1)

This easy to use MacBook Air stand is designed to create more space on your workplace. The MacBook stands at a 44° angle on your desk, which allows the continued use of the MacBook and yet leaves more space on your desk. The stand is…

Gopro Frame Hero 5/6/7 Black and Hero 2018

Un marco vertical Gopro para filmación vertical para aplicaciones de teléfono como TikTok, Instagram... descargado de otra página y también he hecho el mismo diseño pero en Horizontal por eso lo comparto por acá. Para Gopro Hero 5, Hero…

Car Phone Holder for Toyota Aygo, Peugeot 107, Citroen C1 (2005-2018 models) - iPhone 12/13/14 & iPhone 12/13 mini

Simple mount to sit on the dashboard. Fits the current type of iPhones (with or without a regular cover) iPhone 12 iPhone 13 iPhone 14 iPhone 12 mini iPhone 13 mini Fits the current type of cars Toyota Aygo (2005-2018 model) Citroen C1…

2018+ Jeep JL grab bar 1" RAM ball mount

Design goals: Support phone and tablet mounting as close as possible to the windshield without obstructing the driver's outside field of view. Compatibility with 1 inch RAM ball products To install, remove the decorative hex bolt on the…

Jeep Wrangler JL Trail Rated Badge 2018

Not 100%, but close enough. Category: Automotive

Stacking silverware tray for top drawer in 2018-2020 Winnebago Revel

Stacking silverware tray for top drawer in 2018-2020 Winnebago Revel. Got tired of having a mess of silverware, matches, rubber stoppers, paperclips, etc. floating around in the top drawer, so made up this quick two level drawer tray.

Jeep Wrangler JK (2007 - 2018) Glove box organizer

Taking inspiration from CustomNiches's JL design ( https://www.printables.com/model/415930-jeep-wrangler-jl-2018-glove-box-organizer ), I designed a similar shelf for JK Wranglers. Supports are not needed when pieces are laid flat on the…

15" MacBook Pro Stand (Late 2018)

This is a remix of the vertical MacBook Pro stand by Lorbus, adjusted to fit the late 2018 15" MacBook Pro (his was made for an older model that was thicker and didn't fit my laptop). It should fit all the 15" MacBook Pros released after…

Slotted GMC Sierra/Chevrolet Silverado iPhone Mount (2014 to 2018 with center console)

This is a remix of Penobscot's outstanding iPhone mount design. I added v-slots to the mount and v-posts to the back of the phone holder to allow for rigid assembly. With supports, I was able to print a great looking 2-piece assembly with…

Shell Case for Kindle Paperwhite 10th Gen (2018 onwards)

Simple remix of BenHSmith13's case with the honeycomb cutout which removes the cutouts and has a completely flat back. I also made a slight edit to the bottom of the case because the original had a first layer that was much smaller than…

Mercedes AMG G 63 (2018)

Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!

Free gift to all Solar Christmas village 2018

Here is the solar Christmas gift I remade from an older one I had designed and published.. Also see the original one at: https://www.thingiverse.com/thing:3220585 I designed this in Blender as a gift for all from the original. It is…

Geeetech A10 (Late 2018) Part Cooling Duct

I had a lot of trouble finding a fan duct model which worked on the late 2018 version of the Geeetech A10 - all the versions I found were too wide and didn't work. This is a reimplementation that's close to the original, with some…

Better Macbook Air Stand 2018-2020 (M1)

A MacBook stand to combat turtle neck. More sturdy and stable than the original "MacBook Air Stand 2018-2020 (M1)". Works with MacBook Air 2018-2020 models. I recommend setting the internal fill to 100% in the area where the laptop is…

Zachary Scan -Standing -9 JUN 2018

Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Version three is a different pose, for single filament printers. Help support my design work by visiting my referral links:…

Renault Espace (2018) CupHolder

Believe it or not..: The Renault Espace (2018) top model comes without a cupholder.! Here you have a cupholder for mounting in the middle console compartment. It has a little coinbox as well. It's a snug fit, but when pushed into place it…

CarPicture - Porsche Singer 964 DLS (2018)

Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x200x2mm

Galaxy A7 (2018) Case

Try to make a phone case with flex

LOGO FORD FIESTA 1.6 2013 - 2018

LOGO FORD FIESTA Conserva las medidas originales de fabrica!

Ford Mustang GT 2018 (Fixed Mesh)

I have found printing with the car at a 45-55 Degree tilt (Front end upwards) to be the best orientation for smooth curved surfaces. Import the two parts of the wheel into you slicer as an object with multiple parts and they should…

2018 Ford Mustang GT

a 3d model of a Mustang. If you like it, please download and refer to a friend! I need prusameters for a spool soon!!!!!

Mclaren Senna (2018)

Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art

2018 Ford F-150 Coin tray stopper

stops the coin tray from sliding back and forth in the console while driving https://www.etsy.com/listing/1302932455/ford-f-150-coin-tray-stopper?ref=listings_manager_grid Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…

KFC LOGO (2018)

I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.

Eintracht Frankfurt Logo - Pokalsieger 2018

Habe zwei STLs eingestellt. Einmal das normale Logo und einmal mit dem Schriftzug "Pokalsieger 2018". Habe jede Ebene 3mm abgesetzt, falls man das ganze nach unten skalieren will oder muss - Außendurchmesser bei 100% ist 200mm. Somit kann…

2014 - 2018 GM truck vent extensions

These are my fix for the rear floor vents for 2014 to 2018 Chevrolet Silverado and GMC Sierra. These may work for the Tahoe's, Yukon's, Suburban's, etc… vehicles with the same ducts. The major problem was the duct collapsing and slipping…

Car Model Dodge RAM 2018 Laramie 1500

Car Model DODGE RAM LARAMIE 2018, can be scaled to any size. There are STLs in colours and single colour.

iPad Pro 2018 12.9" VESA Monitor Mount

Adapted (crudely) an iPad wall mount by ChuckAhoy (thanks Chuck!) to become a quick and dirty VESA mount for a monitor arm I had around the house. Works great! Design notes: Uses the 75mm x 75mm hole pattern. 4x #6-32 (x 1/2in in my case)…

2018 (Unibody) Mac Mini Bottom Cover

This is a bottom cover for the 2018 Mac Mini. Replacements are oddly expensive online and I was making another project that attached using the cover's system and since that's the hard part to model I figured I might as well make this…

Macbook Pro Wall Mount Rails (2013-2018 models)

These rails vertically mount a Macbook Pro on a wall or under a desk. Compatible with portrait and landscape mounting. The bracket dimensions are: h: 155.6mm w: 51.4mm d: 32mm It is designed for 18mm MBPs which includes the following:…

iPad Pro 2018/2020 Stand

This is a stand that will support both sizes of iPad Pro 2018 and 2020 models. Print instructions I have included the gcode that I used for printing. 65% fill with supports everywhere.

2018+ Jeep JL seat belt silencer

There are several legit reasons to silence the seat belt nag warning. One of which IS NOT so you can roll around town without wearing your seatbelt! Please be an adult when using this design. I like to silence the warning when a package…

Obal pro Samsung Galaxy A7 (2018)

Po pár prasklých obalech z Číny jsem vytvořil vlastní a sedí perfektně. Pro tisk jsem zvolil materiál PP, je pružný, takže jde pěkně nasadit, a navíc je téměř nezničitelný.

Subaru Crosstrek 2018+ / Impreza 2017+ cupholder adapter for 40oz Takeya water bottle

Do not use PLA or the heat from inside your car will distort the shape quickly. Use PETG or something with a higher glass transition temperature. No supports are required, just print standing upright. Originally posted at:…

#0124 Honda Odyssey 2018 - 2024 Key Fob Protective Case

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This case is to protect the key fob from scratches by…

Dacia Sandero 2018 air vents phone holder

Only a slightly modified model from XVIIarcano. Bracket shortening and cradle extension for Redmi Note 9 pro.

2018+ Crosstrek/Impreza Water Bottle Holder with F3D

If your water bottle is too big for your Subaru Crosstrek/Impreza's water bottle holder, look no further. This print sits in your water bottle holder and allows for a larger water bottle to fit in the cup holder. I specifically designed…

2018+ Jeep (JL) key hole hider

Let's be honest, nothing says “I've never taken this offroad” like a chromed out Jeep. The only thing worse is no chrome anywhere except the key holes! These key hides will return some trail cred to your ride. You can use a little double…

Ford Fiesta Cargo Cover Bracket (2013-2018)

This is a replacement part of the cargo cover bracket for a Ford Fiesta. I have one from 2015 but the range from 2013 to 2018 should be similar. Just check the picture of the original piece to see if it matches your car. Be careful when…

Dodge Challenger SRT Hellcat 2018 Keychain

Dodge Challenger SRT Hellcat 2018 Keychain This bold keychain is inspired by the powerful Dodge Challenger SRT Hellcat 2018, perfect for muscle car fans! Recommended to print with a 0.2 mm nozzle for the best detail. The keychain shown in…

Cupholder & USB Holder for aftermarket center console - Rifter, Berlingo, Combo, Proace, Combo 2018

Designed specifically for the PSA Berlingo (K9) model's aftermarket center console. Manufactured using ABS to withstand varying weather and heat conditions. Features a movable cupholder and an integrated USB cable holder.

iPad Stand 2018

Minimalistic iPad stand.

Kenner Y-Wing (1983) Engine Strut (Single) - v1.31 - 11 Mar 2018

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kmP4DXM1LJ7 Category: 3D Printing

MK6 MK6.5 2011-2018 VW Jetta Manual Shift Knob Adapter

Want a manual style shift knob in your automatic mk6 or mk6.5 VW? Look no further! Shift knob adapter for automatic style transmissions to adapt a different, or in my case, more comfortable shift knob. Simply pull the shift knob…

KTM 690 Enduro/SMC R 2012-2018 Headlight Mount

A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…

Halloween 2018/kills/Ends Micheal Myers Dead eye insert/display plate

Micheal Myers Dead eye insert/display plate From The Halloween trilogy 3D printable

MacBook Pro (15-inch, 2018) wall hanger

I wanted to get my laptops out of the way (usually piling up on a table somewhere) and so created some fall mount brackets. I needed them to be sturdy, low profile, but also to allow charging when ‘docked’. Print settings: PETG 0.4mm…

Hook Jimny (2018+ / commercial)

Hook to mount on the Jimny (commercial) partition grid Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 25% Filament: Prusament PLA galaxy silver Category: Automotive

Tile Mate Case (Fits Current Models 2018 and Forward) Anti-Pocket Presser

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I love my Tile Mate Bluetooth…

Honda Odyssey (2018) Large Cup Holder

This is a cup holder for 2018 Honda Odyssey. It is designed to fit in the section beneath the center console. It will accommodate cups with a maximum base size of 3 ¾". Printed in PETG.

Ronix Surf Skim Board Fin 2018 and Newer

This was a design for my brother. He goes wake surfing often and due to having a lot of people on the boat and new people learning, the fins get broken often. Being very expensive to replace we decided to try to make them. This is my go…

MacBook Pro 2018 Stand

Simple, quick to print, no frills stand for MacBook Pro 2018 (might fit others?) Printed in PETG with 100% infill for strength, at 0.5mm layer height. Lined with stick-on felt (2mm thick) for cushioning. To be printed/used in pairs.

Yellowstone - Beth Dutton - 2018-2024

Yellowstone - Beth Dutton (Kelly Reilly) - 2018-2024 3D printable model.

Dispenser for Nescafe 2018 glass bottle

If your hands are shaking, this will help you out. See https://www.youtube.com/watch?v=tqcsF8uFTTg for a demo of how it works and how to assemble it. Obs, the video show the old bottle, not the new one. See the images for the bottle that…

5th Gen Subaru Outback Legacy Speaker Spacer Adapter 2015 2016 2017 2018 2019

!!! DO NOT EVER, EVER, EVER! PRINT CAR PARTS WITH PLA !!! PLA WILL reach glassing temperatures on hot sunny days, no matter WHERE in the car the part goes. PETG, ABS, or other similar higher-temp filament is REQUIRED With that safety…

door plug subaru forester 2012-2018

door plug for subaru forester, i made it for forester of 2013 year.

Rock Bands - Def Leppard Jammin' on Stage - 2018

Rock Bands - Def Leppard Jammin' on Stage - 2018 3D printable model.

Yellowstone - John Dutton - 2018-2024

Yellowstone - John Dutton (Kevin Costner) - 2018-2024 3D printable model.

Audi 2018+ B9 A5/S5/RS5 Driver Side Cubby Tray

There is a giant cubby next to the steering wheel on this car. Here is a tray that fits in there snug and allows that space to be more usable. Enjoy! The published pic was before I embedded the Audi logo in the bottom. My dimensions were…

GoW 2018 Kratos Avatar Cherry MX keycap

Kratos Avatar keycap Category: Video Games

2018+ Jeep Wrangler JL/JLU Fuel Door Ice Scraper

🚨 NOW Available from me on Etsy: https://www.etsy.com/listing/1126016685/fuel-door-ice-scraper-for-jeep-wrangler ------- Keep your ice scraper handy for the cold winter mornings. Fits 2018+ Jeep Wrangler 2-door (JL) and 4-door (JLU).…

Mac Mini 2018 Base

I needed a way to cool my Mac Mini without replacing the logic board. This shroud holds a 120mm Noctua fan in place and forces air through the Mac mini and out the rear. Cooling is better than stock.

iPhone MagSafe Mount For Nissan Altima (2012-2018)

This allows you to mount a MagSafe compatible iPhone in the 5th generation (2012-2018) Nissan Altima for use as a secondary screen. Works great with maps as well as the new StandBy feature in iOS 17. Fits in solidly to the lower storage…

Improved cup holders for 2007-2018 Sprinter

These cupholders are big enough for most cups. Can easily fit a can that is inside a YETI coozie with some room to spare. Also has pen holders build into the space. sprinter-cup-base-cups-1.1 - Best version, clean.…

Owala FreeSip 24oz adapter for 5th gen Honda Odyssey (2018)

The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…

MacBook Pro (15-inch, 2018) Riser

Little riser for a MacBook Pro (15-inch, 2018) Print it two times and then put it to the left and the right side of the mbp. All Ports are still usable. Probably fits other Notebooks if needed.

Anet A8 large leveling knobs - 2018 version for larger wingnuts

This is a remix with more space for the new wingnuts of the Anet A8 Model 2018, also I reduced the size of the inner wheel because it collided with my frame. Don't forget the support because I added a little extrusion to distance the…

Kenner Y-Wing (1983) Realistic Front Gun V1.2 (22nd Feb 2018)

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/7vM8LBqHMnv Category: 3D Printing

Smartphone Car Holder - Mercedes CLA <2018

Smartphone holder specially designed for the Samsung Galaxy S23 Ultra, for use in the Mercedes CLA (2018). This bespoke smartphone holder fits perfectly in place of the car's ashtray, offering a practical and stylish solution for drivers.…

Horror Movies - A Quiet Place - 2018

Horror Movies - A Quiet Place - 2018 3D printable model.

Yellowstone - Rip Wheeler - 2018-2024

Yellowstone - Rip Wheeler (Cole Hauser) - 2018-2024 3D printable model.

Yellowstone - Kayce Dutton - 2018-2024

Yellowstone - Kayce Dutton (Luke Grimes) - 2018-2024 3D printable model.

2018 Ford Fusion Phone Holder

There is an awkward change holder slot in my car so I figured I would put it to better use. This is designed to hold my wallet, Iphone 14 pro, a lighter holder, and the key fob for the car. There is also a groove cut into the back for…

2018 srt doge challenger widebody rc shell

iPad Pro 11" (2018) Case

Case for the iPad Pro 11 inch (2018) designed to print in PLA or PETG. May fit more recent versions, mine is model MTXQ2NF/A. It consists of 2 halfs, left and right. This makes it fit on every build plate. Designed in Fusion 360, F3D file…

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Subaru WRX STI 2015-2018

Subaru WRX STI 2015-2018 wall art

Pixel 7 Pro w Spigen Case USB Mount for 2018 Subaru Legacy

I got tired of plugging my phone in every time I got in my car so I made this mount. The base fits in to the change bin on the console; I used some friction tape to keep it in place. The stem is screwed in to the top of the base with a…

Ash vs Evil Dead - Pablo Simon Boliva - 2015-2018

Ash vs Evil Dead - Pablo Simon Boliva (Ray Santiago) - 2015-2018 3D printable model.

Dust bin for VW Polo 2018 center console

This is the Version 2 of the dust bin for VW Polo 2018 center console. The first Version was reworked to now connect dust bin and cap much tighter. Especially the cap has been strengthened. Print instructions Category: Organization…

McLaren Speedtail (2018)

Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art

KNIPEX 86 05 250 Protective Jaws ( Pre 2018 )

The Model comes prealigned and shouldn't require Supports but will benefit from a Brim . The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them. Personally I'd suggest printing a set of three or so…

Accord 10th gen (2018+) vent phone mount

Recommended to be printed in PETG with 50% fill. My ABS print snapped at the ball neck after about a year. YMMV. How to mount: Hook the top groove under the bottom of the screen edge and hook the bottom groove into the vent. I liked the…

Kindle Paperwhite 10th Gen (2018)

Accurate STEP for Kindle Paperwhite 10th Gen (2018) for case design and accessories.

Samsung A7 2018 Prusa Research cover (Multi Material)

I was looking for a new cover for my Samsung Galaxy A7 and obviously had to create one with the Prusa Research by Josef Prusa logo to fit with all my other stuff. Update 5/24: I replaced the design with a new and improved version. The…

Center Console Organizer - Audi A3 8V 2018

This is a Organizer for the Center Console of a Audi A3 8V 2018. The two slots for cards maybe a little tight for a normal Credit Card but it fits. Those two holes are for Labello/ Chapsticks or whatever you want. This is the first time I…

Business Office 2018 Customizable Beefy Trophy + Blender Bake Tutorial

Printed at 100mm tall, customized for the business office! Print instructions Category: Sculptures

2013-2018 Ram Dash Mount

This was designed to go into the little cut out above the radio on Ram 1500s. Take out the rubber, remove the 2 screws and screw this model in its place. It is not recommended to print this in PLA as cars do get hot especially in the…

iPhone 12 / 13 / 14 / 15 / 16 Pro Audi TT Mk2 (2006-2014), Audi Q3 8U (2010-2018), CD Concert Support

iPhone 12 / 13 / 14 / 15 / 16 Pro Audi TT Mk2 (2006-2014), Audi Q3 8U, CD Concert Support Changelog: V2 - Added power button and volume button, respect the orientation of the phone, and extended compatibility to Audi Q3 8U (2010-2018)