1 / 6
2018+ Crosstrek/Impreza Water Bottle Holder with F3D — zdjęcie 1
1 / 6

2018+ Crosstrek/Impreza Water Bottle Holder with F3D

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If your water bottle is too big for your Crosstrek/Impreza, look no further. This model extends your waterbottle holder.

Ocena
5 / 5
Polubienia
26
Pobrania
159
Wydruki
1
Wyświetlenia
1276
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

If your water bottle is too big for your Subaru Crosstrek/Impreza's water bottle holder, look no further. This print sits in your water bottle holder and allows for a larger water bottle to fit in the cup holder. I specifically designed these for my two Yetis I have but they likely fit other bottles well and you can use the F3D file to modify the diameter.

Print Settings

  • Layer Height: 0.20mm Quality
  • Material: A heat resistant material like ASA is best, I recommend this ASA¹
  • Infill 10-15% (mostly for thermal resistance)
  • Color change at layer 34 to get the Subaru logo to be a different color.

How to Change the Model

  • If you make one for your own water-bottle please post a remix for others!

Adding/Removing the Subaru Logo

  • To remove the Subaru Logo, take the timeline bar and slide it to the left up onto this point.
  • To remove the pocket the Subaru logo sits in, move the slider further over to this point.

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!

Tagi