KNIPEX 86 05 250 Protective Jaws ( Pre 2018 )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Set of Protective Jaws for the Pre 2018 KNIPEX 86 09 250 Pliers Wrench.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 466
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Model comes prealigned and shouldn't require Supports but will benefit from a Brim.
The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them.
Personally I'd suggest printing a set of three or so like the Commercially available ones as they are after all a Consumable and it should help with stretching the Layer Times near the end of the Print.
As for installing them - Inside the Entrance is a slight Bulge on both sides that will push the Shell apart create a Friction Fit unlike the original ones that supposedly snap on ( the Geometry of the Pre 2018 Pliers doesn't allow for that feature ).