Qidi Box hub enclosure for jam resistant filament guide (Remix) Updated on 21/10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of hub enclosure,. Seems there are two types of hub, please check dimensions before print.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 295
- Wydruki
- 3
- Wyświetlenia
- 2565
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 21/10/25- attached 2 files of front enclosure for new type of hub.
Please check dimensions of the hub ( seems there are two types )
After installing my QIDI box, I was inspired to create a model addressing issue with PTFE tubes . The original author, https://www.printables.com/@R985_3546396, received box before me, and I was too lazy to start my own project after seeing his/her impressive work.
There are two versions of remix:
- Model with extra screw slots : requires extra screws - one for M3 hex bolt, another for M3 wood screw, both min 20mm long
- Model with repositioned screw slots, require only original screws
Enclosure gives perfect fit for hub after few dimension changes.
Also I have created little bracket for bowden tube support https://www.printables.com/model/1386069-qidi-box-jam-resistant-filament-guide/files which can be hanged on the back of the Qidi Plus 4 printer.
Model can be found here :
https://www.printables.com/model/1408927-bowden-tube-support-qidi-plus-4-bracket-for-qidi-b
also here is Y-splitter designed recently :
https://www.printables.com/model/1413138-y-splitter-with-pc4-m6
All printed in PETG and PETG Matte. Any other filament will be ok too.
0.4 nozzle
Thank you