1 / 6
Shifter Cable Bushings for the Veloster N, i30N, Elantra N and Avante N (MT ONLY cars) — zdjęcie 1
1 / 6

Shifter Cable Bushings for the Veloster N, i30N, Elantra N and Avante N (MT ONLY cars)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Helps tighten up the shifting feel a lot. Replace rubber and plastic with TPU and sintered bronze.

Ocena
0 / 5
Polubienia
6
Pobrania
19
Wydruki
0
Wyświetlenia
297
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Tighten up your shifter even more than what you can get from just the shifter base bushings alone.

Not many have dabbed into shifter cable bushings for this car.  For other manual cars, many performance shops do this as soon as the new car is released.  But it's been 6 years since the release of the Veloster N with nothing.  Only one company has a product out for cable bushings but it's only confirmed for the i30N.  It is also only available in the UK, which makes it not very feasible to ship over to the US due to shipping fees.

So this is my solution to replacing those horrible OEM bushings.  Using things that are readily available on Amazon so you can actually get this car up and running within the same week.

Things that are needed:

Print settings I use for great layer adhesion:

  • Speeds for first layer set at 20 for walls and infill

  • Speeds for everything else is 40, walls and infill

  • Concentric infill

  • 100% infill

  • Fan speeds slow, 25% and lower

 

How-to with a lot of the pics click here!

UPDATE!
  • This is now confirmed to work on the Elantra N!  The install is exactly the same too!

  • I have changed out the head cap screw with a button head screw.  This eliminates the need for the M8 washer as there is now clearance between the shifter linkage on the trans and the button head screws.

Tagi