1 / 1
Replacement Turn Signal Lever for most kymco scooter models.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Broke my turn signal lever in a low speed crash. New unit is over €40 from Kymco, 3d printing is free :P
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A very simple turn signal lever designed after 2 peaces of the original one. may be a bit tedious to put it and may require some sanding to get it to move smooth. Mine took a month to wear in and feel like the original one.
Installation guide:
- Power scooter off
- Remove mirror and all other plastics to get to the bolts holding the button assembly
- Unscrew button assembly, unplug its electrical connector (be mindful of fragile plastic tabs)
- Unclip (Unscrew depending on model) the turn signal button from the assembly.
- push it towards the front (it comes out of the front of the assembly)
- carefully unclip its 2 parts, be mindful to not loose the small ball or spring.
- sand new lever until ball and spring move smoothly
- sand new lever notch, top and bottom part until switch moves smooth in assembly (may take a few tries, be patient and don't loose parts)
- do everything from step 6 to 1 backwards
- ENJOY YOUR FREE TURN SIGNAL FIX!
If this helps you please upload a make!
AS always, happy printing and safe riding, hopefully you won't need to print another.