1 / 1
Replacement Turn Signal Lever for most kymco scooter models.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Broke my turn signal lever in a low speed crash. New unit is over €40 from Kymco, 3d printing is free :P
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A very simple turn signal lever designed after 2 peaces of the original one. may be a bit tedious to put it and may require some sanding to get it to move smooth. Mine took a month to wear in and feel like the original one.
Installation guide:
- Power scooter off
- Remove mirror and all other plastics to get to the bolts holding the button assembly
- Unscrew button assembly, unplug its electrical connector (be mindful of fragile plastic tabs)
- Unclip (Unscrew depending on model) the turn signal button from the assembly.
- push it towards the front (it comes out of the front of the assembly)
- carefully unclip its 2 parts, be mindful to not loose the small ball or spring.
- sand new lever until ball and spring move smoothly
- sand new lever notch, top and bottom part until switch moves smooth in assembly (may take a few tries, be patient and don't loose parts)
- do everything from step 6 to 1 backwards
- ENJOY YOUR FREE TURN SIGNAL FIX!
If this helps you please upload a make!
AS always, happy printing and safe riding, hopefully you won't need to print another.