IKEA SKÅDIS PC4-M6 Pneumatic Connector Holder for PTFE Tube (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKÅDIS holder for PC4-M6 pneumatic connector – simple solution for PTFE tubes, no threading or gluing required.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Description (EN)
This is a remix of Ingurum’s “Skadis PTFE Terminal M6/M10”.
The original design required either glue, a nut, or melting the plastic to make the pneumatic connector sit securely.
I modified it so that the thread of a pneumatic connector (in my case the Bambulab PC4-M6 Pneumatic Connector for PTFE Tube) can be screwed directly into the printed part. It grips the plastic tightly and holds bombproof – no extra work needed.
This makes it a SKÅDIS PC4-M6 Pneumatic Connector Holder for PTFE Tubes. Perfect for keeping PTFE tubes organized right on your IKEA SKÅDIS pegboard.
The connectors are inexpensive: 5 pcs cost around 2.58 € at Bambulab.
https://eu.store.bambulab.com/de/products/pc4-m6-pneumatic-connector-for-ptfe-tube
Works great – I recommend printing in PETG for extra durability.
- Material: PETG recommended (PLA also possible)
- Supports: required for best results
- Infill: 15–20%
- Layer height: 0.2 mm
- Perimeter: 2–3
--------
Description (DE)
Dies ist ein Remix von Ingurums „Skadis PTFE Terminal M6/M10“.
Beim Original musste man das Gewinde einkleben, eine Mutter einsetzen oder den Kunststoff anschmelzen, damit der Pneumatikanschluss sicher sitzt.
Ich habe das Modell so angepasst, dass sich das Gewinde eines Pneumatikanschlusses – in meinem Fall der Bambulab PC4-M6 Pneumatic Connector for PTFE Tube – direkt ins Kunststoff eindrehen lässt und bombenfest sitzt. Ganz ohne zusätzliche Tricks.
So ist es jetzt ein SKÅDIS-Halter für PC4-M6 Pneumatic Connectors – optimal, um PTFE-Schläuche ordentlich am IKEA SKÅDIS Pegboard zu befestigen.
Die Connectoren sind günstig erhältlich: 5 Stück kosten ca. 2,58 € bei Bambulab.
https://eu.store.bambulab.com/de/products/pc4-m6-pneumatic-connector-for-ptfe-tube
Funktioniert super – ich empfehle PETG für lange Haltbarkeit.
- Material: PETG empfohlen (PLA ebenfalls möglich)
- Supports: für optimale Ergebnisse erforderlich
- Infill: 15–20%
- Layer height: 0.2 mm
- Perimeter: 2–3