Carrera Go!!! Track Guardrails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guardrail for the Carrera Go!!! system 90 degree turn. The 'barrier_curve-45' part attaches to the outer rim of the…
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 360
- Wydruki
- 3
- Wyświetlenia
- 2619
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Guardrail for the Carrera Go!!! system 90 degree turn. The 'barrier_curve-45' part attaches to the outer rim of the 90-degrees curve. Two curve parts are connected with a connector part. At the end of the turn an 'endpoint' part can be attached for a smooth ending of the guardrail.
Attention: each guardrail part is a little bit too short, there are different endpoint parts to compensate. For example, for a 180-degree turn, use 4 curve parts, 5 connectors, one 'endpoint' and one 'endpoint-180'. Flip one endpoint in your slicer, otherwise they'll all face in the same direction.
Update: I moved the location of the connector part, so it doesn't interrupt the car-facing barrier any more. A new set of parts with a 'v2' name is available, unfortunately they are not compatible with the older parts.
Also I added 'CarreraGo_TrackSupport_75mm', which I use to create a bridge in the track. It is based on the excellent looping connector at https://www.thingiverse.com/thing:487860
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: PRUSA PLA/PETG Various
Category: Toy & Game Accessories