Carrera Go!!! Track Guardrails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guardrail for the Carrera Go!!! system 90 degree turn. The 'barrier_curve-45' part attaches to the outer rim of the…
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 360
- Makes
- 3
- Views
- 2,619
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Guardrail for the Carrera Go!!! system 90 degree turn. The 'barrier_curve-45' part attaches to the outer rim of the 90-degrees curve. Two curve parts are connected with a connector part. At the end of the turn an 'endpoint' part can be attached for a smooth ending of the guardrail.
Attention: each guardrail part is a little bit too short, there are different endpoint parts to compensate. For example, for a 180-degree turn, use 4 curve parts, 5 connectors, one 'endpoint' and one 'endpoint-180'. Flip one endpoint in your slicer, otherwise they'll all face in the same direction.
Update: I moved the location of the connector part, so it doesn't interrupt the car-facing barrier any more. A new set of parts with a 'v2' name is available, unfortunately they are not compatible with the older parts.
Also I added 'CarreraGo_TrackSupport_75mm', which I use to create a bridge in the track. It is based on the excellent looping connector at https://www.thingiverse.com/thing:487860
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: PRUSA PLA/PETG Various
Category: Toy & Game Accessories