1 / 5
glowing Emergency Exit Signs (3 types) (glow in the dark) — zdjęcie 1
1 / 5

glowing Emergency Exit Signs (3 types) (glow in the dark)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-illuminating emergency exit signs – printed quickly and easily with just one filament change!

Ocena
0 / 5
Polubienia
34
Pobrania
123
Wydruki
0
Wyświetlenia
859
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Summary

Self-illuminating emergency exit signs – printed quickly and easily with just one filament change!

Print

  • Filament: “Glow in the Dark” and a nice, dark green filament (PLA or PETG - don't mix them!)
  • Layer height: 0.2mm
  • Infill: 100%
  • Perimeters/Walls: 2
  • Supports: Not required

Make sure to print the first two layers in green filament. You can use a height modificator in your slicer or a manual filament change.

Please note!

When using glow-in-the-dark material, be sure to use a hardened nozzle. Normal brass nozzles wear out quickly because the filament is very abrasive.

Installation

Use double-sided adhesive tape to stick the part onto the desired wall.

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Tagi