glowing Emergency Exit Signs (3 types) (glow in the dark)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Self-illuminating emergency exit signs – printed quickly and easily with just one filament change!
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 124
- Makes
- 0
- Views
- 860
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Summary
Self-illuminating emergency exit signs – printed quickly and easily with just one filament change!
- Filament: “Glow in the Dark” and a nice, dark green filament (PLA or PETG - don't mix them!)
- Layer height: 0.2mm
- Infill: 100%
- Perimeters/Walls: 2
- Supports: Not required
Make sure to print the first two layers in green filament. You can use a height modificator in your slicer or a manual filament change.
Please note!
When using glow-in-the-dark material, be sure to use a hardened nozzle. Normal brass nozzles wear out quickly because the filament is very abrasive.
Installation
Use double-sided adhesive tape to stick the part onto the desired wall.
Do you like my work? I would be very happy if you would support my work on Ko-fi.