21 models
ISO 7010 - Safe condition Signs (Emergency Exit with Directions) In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. I have uploaded profiles for AMS and without AMS, the profiles without AMS have…
Update July 28th, 2020: Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the…
Best to be printed on a Multi-Colour Printer. Can be printed with only 1 AMS Hinges can be made from a cut piece of filament. Model updated 15/11/24 as I wasn't happy with the hinge strength on the base plate. I've included an updated…
I added a 3-tool verison of Kyu_u's orginal model. I also included a 3-tool model with the mount facing the other directions which works better for some m12 tools. The “Inner” is the taller part of the battery is closer to the wall. The…
I had what I'm sure is a very niche problem. Whenever I was replacing my nozzle I would set the 2 fan shroud screws onto my table. Where they would then instantly roll off and I would have to search the carpet for them. I quickly remixed…
This Arca swiss quick release plate fits the tripod clamp in 2 directions. Diese Arca swiss Schnellwechselplatte passt in 2 Richtungen auf die Stativklemme. Link to Tripod / Link zum Stativ:…
This is a quick overhang test using vase mode. It can test your printer's performance in different extrusion widths, in all 4 directions at the same time. The angles vary from 45° to 70°. The base is marked with FRBL for front, right,…
This is the 3D version of the Pythagoras tree (the traditional 2D version can be found here ). The cubes are placed in alternating order i.e. first we put a cube on the left and right hand side on top of the base (in 45° to the base and…
windmill with small and large wings that rotate in 2 directions. Composed of several parts. Wings can be printed in different colors. A bearing Ø22 x Ø8 x 7 is used to rotate with the wind direction. Tail can be printed in different…
This is a simple remix of Gurtmail's, just adding in the option for the cap to be horizontal or vertically mounted. No supports needed. Note that the rotated versions compromises one of the stems inserts to get as close as possible to…
T-fitting (3 directions) for 76 mm semi-rigid pipe in 1 piece Find out more our T-fitting: https://www.alveo3d.com/en/product/flexible-air-duct/
Similar to other models , but this has the ports for the drives to be facing away from each other. Created out of necessity to fit into a Lenovo M900 SFF computer, which needs right angle data & power connectors. You should probably print…
This is a Direction sign. You can personalize this model, and make your own direction signs. If you have a multicolor printer, take a look to the 3mf file. If you want to support my work, and have a commercial license, you can check out…
leveling directions for Sidewinder X1 and printers with same hand bed leveling screws Print instructions Category: 3D Printer Accessories Summary leveling directions for Sidewinder X1 and printers with same hand bed leveling screws
This is a simple button legend for my Raspberry Pi arcade machine printed with Solutech Black PLA and AIO Robotics Red & Blue PLA. The look was inspired by an Etsy sign by LiztonSignShop. I started with red, switched to black then back to…
T-fitting (3 directions) for 76 mm semi-rigid pipe, 4-piece including 3 pipe_adapter_T_support Get more information at: https://www.alveo3d.com/en/product/flexible-air-duct/
Your phone can be mounted in front of the driver to provide driving directions. I found the iPhone maps more reliable than the cars' maps. I mounted it easily in an older Ford Explorer and in a Lexus ES350. It needs a ledge about 1 - 1-½"…
I printed with 0.2 mm layer height in PLA, but it should work with any layer height and material.
I had what I'm sure is a very niche problem. Whenever I was replacing my nozzle I would set the 2 fan shroud screws onto my table. Where they would then instantly roll off and I would have to search the carpet for them. I quickly remixed…
Best to be printed on a Multi-Colour Printer. Can be printed with only 1 AMS Hinges can be made from a cut piece of filament. Model updated 15/11/24 as I wasn't happy with the hinge strength on the base plate. I've included an updated…
![#0049 Quick Overhang Test Vase Mode [All 4 Directions at Once]](https://media.printables.com/media/prints/350122/images/2975339_64312733-56fe-46f5-9dc9-9f2172c416eb/20221226_141445.jpg)
